Temporary tire sealing

AR40.10-P-1090A

Temporary tire sealing

27.09.2017

Model

all (CAR, smart)

1

Special Cement BL

2

Hand milling cutter

3

Chalk

4

Seal body

5

Flipper handle awl

6

Knife

7

Push button

8

Retaining bracket

9

Clamping hook

10

Awl

2

Hand milling cutter

10

Awl

Topical note

Notes on temporary tire sealing

AH40.10-P-1090-01A



Check

1

Check general condition of tire


In event of damage to sidewall or outside the repair area, provisional sealing may not be used.
Otherwise, the tire function cannot be ensured.

2

Search for point of damage on tire and mark with chalk (3)

 Leakage spray can be used for assistance wen searching for the damage point.

 If a damage point cannot be located, provisional sealing is not possible. The search can also be performed on a removed wheel and tire assembly.

Temporary tire sealing

*BR00.45-Z-1021-08A

Leak detection spray

*BR00.45-Z-1002-03A

Leakage detection spray for USA

*BR00.45-Z-1004-03A

3

Remove damage-causing object from tire using suitable tool

4

Check course, size and position of hole orifice at damage point


Hole orifices outside a specified repair area and over 6 mm in diameter may not be repaired.
A complete sealing of the hole orifice cannot be assured.

Provisionally sealed

5

Screw hand milling cutter (2) in clockwise direction several times into and out of damage point's hole orifice

 The hole orifice is cleaned here.

 Alternatively, a commercially available 6 mm carbide milling cutter tip may also be used with a drill machine or a cordless screwdriver.

Temporary tire sealing

*BR00.45-Z-1021-08A

6

Hook sealing body (4) into awl (10) and pull firmly downwards towards end of eyelet

 The awl (10) must be plugged upwards into the end of the eyelet through the sealing body (4).

Temporary tire sealing

*BR00.45-Z-1021-08A

7

Release flipper handle on flipper handle awl (5) by applying thumb pressure to mounting frame bow (8) and opening up to end stop

Temporary tire sealing

*BR00.45-Z-1021-08A

8

Hook sealing body (4) into clamping hooks (9) of flipper handle awl (5) and close flipper handle again


Check sealing body (4) for cracks.
Otherwise, the sealing body (4) may fracture when pressed into the hole orifice.

 Handle must latch into place.

Temporary tire sealing

*BR00.45-Z-1021-08A

9

Closed flipper handle awl (5) with clamped sealing body (4) in Special Cement BL (1)

Temporary tire sealing

*BR00.45-Z-1021-08A

10

Feed awl (10) with clamped sealing body (4) in hole orifice up to end stop


The awl (10) shall not be twisted when the sealing body (4) is inserted.
Otherwise, a firm seating of the sealing body (4) cannot be assured.

Temporary tire sealing

*BR00.45-Z-1021-08A

11

Operate push button (7) on flipper handle awl (5) and position sealing body (4) into hole orifice.

Temporary tire sealing

*BR00.45-Z-1021-08A

12

Pull flipper handle awl (5) out of hole orifice


The awl (10) may not be twisted when pulling out.
Otherwise, a firm seating of the sealing body (4) cannot be assured.

Temporary tire sealing

*BR00.45-Z-1021-08A

13

Cut off protruding end of sealing body (4) using knife (6) flush at the contact surface

Temporary tire sealing

*BR00.45-Z-1021-08A



Check

14

Correct air pressure of complete wheel to meet manufacturer's specifications

15

Check damage point for leaktightness


The leaktightness of the damage point must be assured.
In the event of any pressure loss on the complete wheel, the vehicle's road safety is no longer guaranteed.

 Leakage spray can be used for assistance when checking for a leak.

Leak detection spray

*BR00.45-Z-1002-03A

Leakage detection spray for USA

*BR00.45-Z-1004-03A

16

Fit "Maximum permissible speed limit to 80 Km/h" information label into driver's field of vision

Temporary tire sealing

*BR00.45-Z-1021-08A

17

Document "Provisional tire repair" roadside assistance on "Service 24h Auftrag­Mercedes­Benz and smart" and have customer sign it

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-03A

Leak detection spray

Christof Fischer GmbH
www.kaeltefischer.de

BR00.45-Z-1004-03A

Leakage detection spray for USA

LIQUI MOLY
www.liqui-moly.com

BR00.45-Z-1021-08A

Temporary tire sealing

REMA TIP TOP AG
Order no.: 5103610
Order no.: 5103710
http://www.rema-tiptop.de