Modification notes |
10.03.2020 | Bolt, shock absorber to rear axle | Model 460, model 461 with code XG0 (6200 kg permissible gross mass), model 463 up to model year 2019 | BA32.25-P-1001-03E |
10.03.2020 | Bolt, shock absorber to rear axle | Model 461 except code XG0 (6200 kg permissible gross mass) | BA32.25-P-1001-03E |
P35.10-0338-09
Shown on vehicle with disk brakes |
1 | Screw/bolt to rear axle | 5 | Pull rod (only model 460, 461 and 463 without EBV) | |
2 | Bolt to frame | 6 | Trailing arm | |
3 | Transverse control arm | 7 | Shock absorber | |
4 | Electrical connector | 8 | Springs |
9 | Retaining plate |
10 | Differential lock hydraulic line |
P35.10-2172-11
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Danger | Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | |
Topical note | Brake fluid notes | ||
Topical note | Notes on repairs to brake system | ||
| Remove | ||
1 | Secure vehicle against rolling away and then raise |
| |
2 | Drain oil filling of differential into a suitable container | If rear axle is to be disassembled. | |
3 | Detach propeller shaft from differential and secure to frame | ||
4 | Detach damper (7) from rear axle | ||
5.1 | Loosen screw/bolt on rear axle (1) of transverse control arm (3) on frame | Model 460 | |
5.2 | Unscrew screw/bolt at rear axle (1) of transverse control arm (3) and remove transverse control arm (3) in downward direction | Model 463.202/222/236/237/243/244/245/246/247/248/249/250/254/303/306/309/322/323/332/333/336/340/341/346 | |
6 | Loosen screw/bolt at frame (2) of transverse control arm (3) on axle | Model 460 | |
7 | Unscrew brake lines | For model 463.202/222/236/237/243/244/245/246/247/248/249/250/254/303/306/309/322/323/332/333/336/340/341/346 there are three lines on the retaining plate (9). | |
8 | Seal exposed connections using stop plugs | | |
Record plug | |||
9.1 | Unscrew hydraulic line for differential lock shift cylinder | Model 460 | |
9.2 | Unscrew differential lock hydraulic line (10) and detach on axle side | Model 463.202/222/236/237/243/244/245/246/247/248/249/250/254/303/306/309/322/323/332/333/336/340/341/346 | |
10 | Seal exposed connections using stop plugs | Record plug | |
11 | Disconnect electrical connection (4) on differential lock shift cylinder | ||
12 | Remove rpm sensors of rear axle |
| |
Model 463.306/336/346 | |||
Model 463.232/233/308/330/331 with rear axle 742 | |||
Detach on body side. | |||
13 | Secure electrical wiring harness of rear axle rpm sensors on axle side | Model 461 (except 461.302/304/305/331/332/333/334/340/342/343/344/392) | |
14 | Detach hand brake cables from parking brake lever and pull out through floor panel |
| |
15 | Release pull rod (5) of automatic load-dependent brake force control (ALB controller) and unhook | Model 460 | |
16 | Detach mounting clamps of hand brake cables on trailing arms (6) | ||
17 | Unscrew left and right trailing arms (6) on frame | ||
18 | Lower vehicle until springs (8) can be removed | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
19 | Remove screw/bolt from frame (2) on transverse control arm (3) | Model 460 | |
20 | Move rear axle out to the rear | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
21 | Detach left and right trailing arm (6) from rear axle | When replacing rear axle. | |
Model 460 | |||
| Install | ||
22 | Mount left and right trailing arm (6) on rear axle |
| |
Ensure correct seating of the elastomer bearing. | |||
Model 460 | |||
23 | Install rear axle from behind | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
Two helpers required. | |||
24 | Install springs (8) | ||
25 | Screw screw/bolt into frame (2) on transverse control arm (3) | Model 460 | |
Do not yet tighten the screw/bolt on the frame (2). | |||
26 | Lower vehicle until trailing arm (6) can be inserted into frame | ||
27 | Install elastomer bearing of trailing arm (6) in frame and tighten nut | Model 460 | |
28 | Mount hand brake cable at trailing arms (6) | ||
29 | Install shock absorbers (7) | Model 460 | |
30 | Tighten screw/bolt on rear axle (1) of transverse control arm (3) on frame | Model 460 | |
31 | Tighten screw/bolt at frame (2) of transverse control arm (3) on axle | Model 460 | |
32 | Remove stop plug and attach brake lines | For model 463.202/222/236/237/243/244/245/246/247/248/249/250/254/303/306/309/322/323/332/333/336/340/341/346 there are three lines on the retaining plate (9). | |
Brake line to brake hose | |||
Record plug | |||
33 | Remove stop plug from hydraulic line | Record plug | |
34.1 | Attach hydraulic line to differential lock shift cylinder | Model 460 | |
34.2 | Attach differential lock hydraulic line (10) | Model 463.202/222/236/237/243/244/245/246/247/248/249/250/254/303/306/309/322/323/332/333/336/340/341/346 | |
35 | Install rpm sensors of rear axle |
| |
Model 463.306/336/346 | |||
Model 463.232/233/308/330/331 with rear axle 742 | |||
36 | Connect electrical connection (4) to differential lock shift cylinder | ||
37 | Engage and secure pull rod (5) of ALB controller | Model 460 | |
38 | Install hand brake cable |
| |
39 | Mount propeller shaft on differential | Use new self-locking nuts. | |
Bolt, propeller shaft to transmission flange | |||
40 | Fill rear axle with oil | Model 460 as of 6/1/82 with rear axle 741.5 as of 6/1/82 | |
41 | Bleed brake system |
| |
Model 463.236/248 | |||
42 | Check brake system for leaks | ||
43 | Bleed hydraulic system of differential lock |
| |
44 | Adjust parking brake |
| |
Model 460 |
Rear axle |
Number | Designation | Model 460 up to 5/31/82 with rear axle 741.5 up to 5/31/82 | Model 460 as of 6/1/82 with rear axle 741.5 as of 6/1/82 | ||
BF35.10-P-1001-01A | Hypoid gear oil | Filling capacity | Liter | 1,6 | 1,8 |
Sheet | |||||
129 589 00 91 00
Record plug
Henviste dokumenter
- ah4200p000301a Oplysninger om reparation af bremsesystem
- ah4250p000101a Oplysninger om bremsevæske
- ar0060p1000g
- ar3340p0701gg
- ar3520p0100f
- ar3520p0100f
- ar4210p0010gg
- ar4210p0010gs
- ar4220p0540gg
- ar4220p0540gi
- ar4220p0540gi
- ar4220p0545gg
- ar4230p0714aa
- ar4230p0714aa
- ar4230p0714gh
- ar4230p0714gh
- ar4230p0714gy
- as4250z000101a Risiko for forgiftning ved indtagelse af bremsevæske. Risiko for hud- og øjen-skader ved kontakt med bremsevæske
- as4250z000201a Fare for ulykker når køretøjet tages i brug første gang på grund af manglende bremseeffekt, når driftsbremse betjenes første gang efter reparationsarbejde
- ws0100p0092b
- ws2600p3309b