P42.50-2073-09
1 | Right front brake caliper | 4 | Right rear bleed screw for wheel brake cylinder | ||||
2 | Right front outer bleed screw for brake caliper | 5 | Cap | ||||
3 | Right front inner bleed screw for brake caliper | 6 | Brake fluid reservoir |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on repairs to brake system | ||
Topical note | Brake fluid notes | ||
| Remove/install | ||
1 | Unscrew cap (5) of brake fluid reservoir (6) and add new brake fluid up to "MAX" marking | ||
2 | Connect filling and bleeding unit on brake fluid reservoir (6) and switch on | ||
| 000 588 01 82 00 Filling unit | ||
Pay attention to manufacturer's operating instructions. | |||
3 | Remove front wheel-and-tire assemblies | ||
| |||
4 | Carrying out bleeding operation |
| |
Model 460, 461 (except 461.392) | |||
| |||
Model 460, 461 | |||
Model 460, 461 | |||
5 | Install in the reverse order | ||
| Check | ||
Danger | Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | |
6 | Press brake pedal several times and check brake system for leaktightness |
| |
Firm resistance should be noticeable at the brake pedal. | |||
7 | Correct fluid level in brake fluid reservoir (6) | ||
| |||
8 | Check function and effectiveness of brake system |
Henviste dokumenter
- ah4200p000301a Oplysninger om reparation af bremsesystem
- ah4250p000101a Oplysninger om bremsevæske
- ap4010p4050g Af-, påmontering og om nødvendigt omplacering af hjul
- ap4250p4210g Hydraulisk bremsesystem - kontrol og korrektion af væskestand
- ar4210p001002gg
- ar4210p001002sw
- ar4210p010001a
- ar4210p010001a Kontrol af bremsesystem for tæthed
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as4250z000101a Risiko for forgiftning ved indtagelse af bremsevæske. Risiko for hud- og øjen-skader ved kontakt med bremsevæske
- as4250z000201a Fare for ulykker når køretøjet tages i brug første gang på grund af manglende bremseeffekt, når driftsbremse betjenes første gang efter reparationsarbejde
- ws2500p0016b