Power steering - Check the oil level · ap4600p4612p · Mercedes-Benz WIS

AP46.00-P-4612P

Power steering - Check the oil level

17.1.13

MODEL

203 with ENGINE 111, 112, 113, 271, 272, 611, 612, 642, 646

Vehicle with engine 111

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2326-11

Vehicle with engine 112

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2325-11

Vehicle with engine 113

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2324-11

Vehicle with engine 271

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2322-11

Vehicle with engine 272

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2323-11

Vehicle with engine 611

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2327-11

Vehicle with engine 612

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2319-11

Vehicle with engine 642

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2321-11

Vehicle with engine 646

1	Cap
1a	Dipstick
2	Expansion reservoir

P46.30-2320-11

	Remove
 Danger !	Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.	Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.	AS00.00-Z-0013-01A
1	Switch off ignition
2	Open engine hood
			AR88.40-P-1000P
3.1	Remove left intake air duct	ENGINE 112, 113, 272
3.2	Remove front engine cover	ENGINE 642
			AR01.10-P-2405PI
		 Lift the front engine cover straight up without tilting it and place it down on a padded base. Otherwise damage will be unavoidable.
3.3	Remove covers from cylinder head cover and charge air manifold or upper engine cover	ENGINE 611, 612, 646
		ENGINE 611, 646	AR01.20-P-5014-02A
		 Place upper engine cover onto padded base. Otherwise damage will be unavoidable.
4	Remove cap (1) of power steering expansion reservoir (2)	 Before opening the hydraulic circuit of the power steering, thoroughly clean the surrounding area of the separation point. Even minute particles of dirt, introduced into the hydraulic components, can result in malfunctions and damage to the power steering.
		 Press the cap (1) downwards and turn counterclockwise through 90°.
5	Wipe off oil dipstick (1a) with a fluff-free rag and seal the expansion reservoir (2) with cap (1)	 Press the cap (1) downwards and turn clockwise through 90°.
	Check
6	Remove cap (1) and read off oil level on oil dipstick (1a), correct oil level if necessary	 Observe oil temperature and markings on oil dipstick (1a). The oil level must be located on the maximum marking corresponding to the oil temperature.
		 In order to avoid measurement errors, hold the oil dipstick (1a) upright.
		 If oil level is too low, determine cause and eliminate subject to a separate repair order.
	Install
7	Seal expansion reservoir (2) with cap (1)
8.1	Install left intake air duct	ENGINE 112, 113, 272
8.2	Fit front engine cover	ENGINE 642
			AR01.10-P-2405PI
		 Only install the front engine cover after completing all the maintenance operations.
8.3	Install covers onto cylinder head cover and charge air manifold or upper engine cover	ENGINE 611, 612, 646
		ENGINE 611, 646	AR01.20-P-5014-02A
		 Only install upper engine cover after completing all maintenance operations.
9	Close engine hood
			AR88.40-P-1000P

Power steering - Check the oil level

เอกสารที่อ้างถึง