ME-SFI fuel injection and ignition system (ME), DTC memory

AD07.61-P-4000AA

25.11.2019

Engine	112.910/920/923/943, 112.911/921/940/941/942 up to 5/31/00
	Fault codes from P0300 to P0699

 Danger	Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.	Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.	AS00.00-Z-0004-01A
 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
 Danger	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
Topical note	Notes on avoiding damage to ignition system		AH15.10-P-0002-01D
	Connecting hand-held tester (HHT), reading fault memory		AD00.00-P-2000-03A
	Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge		AD07.61-P-2000A
	Reading out the fault code with the pulse counter is not possible
	 Characters for USA vehicles for actuation of the CHECK-ENGINE indicator lamp
	 Characters for EURO3 vehicles for actuation of the engine diagnosis indicator lamp (displayed as  in the HHT)
	The indicator lamp only lights up if an emissions-relevant fault was already stored in the last driving cycle (exception: Misfires "harmful to the CAT", indicator lamp lights up immediately).
	Ignition: ON
	Check, regulate engine, see: Engine DMAN
	Fault memory
Fault code	Fault text	Possible cause/note	Remedy
No fault code	No fault detected	Depending on complaint, perform complete ME-SFI electrics test	AD07.61-P-6000A
			AD07.61-P-6001A

			AD07.61-P-6002A

		112.942 in MODEL 163.154 up to 31.5.98	AD07.61-P-6003A

			AD07.61-P-6004C

      	A misfire B misfire, "harmful to CAT"		AD07.61-P-6001-11A
			AD07.61-P-6001-12A

			AD07.61-P-6001-13A

			AD07.61-P-6001-14A

			AD07.61-P-6001-15A

			AD07.61-P-6001-16A

			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
      	A misfire cylinder 1 B misfire cylinder 1, "harmful to CAT"		AD07.61-P-6001-11A
			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
      	A misfire cylinder 2 B misfire cylinder 2, "harmful to CAT"		AD07.61-P-6001-12A
			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
      	A misfire cylinder 3 B misfire cylinder 3, "harmful to CAT"		AD07.61-P-6001-13A
			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
      	A misfire cylinder 4 B misfire cylinder 4, "harmful to CAT"		AD07.61-P-6001-14A
			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
      	A misfire cylinder 5 B misfire cylinder 5, "harmful to CAT"		AD07.61-P-6001-15A
			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
      	A misfire cylinder 6 B misfire cylinder 6, "harmful to CAT"		AD07.61-P-6001-16A
			AD07.61-P-6001-17A

			AD07.61-P-7002-01A

			AD07.61-P-7002-01B

			Compression pressure

	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
    	Right knock sensor		Line connector
			Knock sensor

	Knock sensor fault code description, ME-SFI		AD07.61-P-4000-12A
    	Left knock sensor		Line connector
			Knock sensor

	Knock sensor fault code description, ME-SFI		AD07.61-P-4000-12A
      	Crankshaft position sensor (L5)		AD07.61-P-6001-09A
	Crankshaft position sensor fault code description, ME-SFI		AD07.61-P-4000-13A
      	Camshaft Hall sensor (B6/1)		AD07.61-P-6001-10A
	Camshaft Hall sensor fault code description, ME-SFI		AD07.61-P-4000-14A
    	Angular deviation of camshaft relative to crankshaft		Check basic setting for camshafts
     	Exhaust gas recirculation malfunction (function chain)		AD07.61-P-6000-27A
	Exhaust gas recirculation malfunction (function chain) fault code description, ME-SFI		AD07.61-P-4000-50A
      	Air injection malfunction (function chain)	 with CODE (925) low-pollutant EURO3	AD07.61-P-6000-24A
			AD07.61-P-6000-25A

			AD07.61-P-6000-26A

	Air injection malfunction (function chain) fault code description, ME-SFI		AD07.61-P-4000-15A
      	Right catalytic converter efficiency too low		Right catalytic converter
	Catalytic converter efficiency too low fault code description, ME-SFI		AD07.61-P-4000-16A
      	Left catalytic converter efficiency too low		Left catalytic converter
	Catalytic converter efficiency too low fault code description, ME-SFI		AD07.61-P-4000-16A
     	Purge system leaky (function chain)		AD07.61-P-6000-30A
			AD07.61-P-6000-31A

	Purge system leaky (function chain) fault code description, ME-SFI		AD07.61-P-4000-17A
     	Purging switchover valve (Y58/1) Function		AD07.61-P-6000-29A
			AD07.61-P-6000-30A

	Purge system leaky (function chain) fault code description, ME-SFI		AD07.61-P-4000-17A
     	Purge system slightly leaky		AD07.61-P-6000-31A
	Purge system leaky (function chain) fault code description, ME-SFI		AD07.61-P-4000-17A
      	Purging switchover valve (Y58/1)		AD07.61-P-6000-29A
	Purge control valve fault code description, ME-SFI		AD07.61-P-4000-19A
     	A activated charcoal canister shutoff valve (function chain) B shutoff valve for activated charcoal canister (Y58/4)		AD07.61-P-6000-32A


			AD07.61-P-6000-33A

	Activated charcoal canister shutoff valve fault code description, ME-SFI		AD07.61-P-4000-20A
     	A tank pressure sensor (B4/3) electrical fault B tank pressure sensor (B4/3) signal oscillating		AD07.61-P-6000-33A
			Activated charcoal canister clogged

	Tank pressure sensor fault code description, ME-SFI		AD07.61-P-4000-21A
     	Purge system highly leaky or tank pressure sensor power supply (B4/3)		AD07.61-P-6000-31A
			AD07.61-P-6000-33A

	Purge system leaky (function chain) fault code description, ME-SFI		AD07.61-P-4000-17A
    	Fuel level sensor		Read out IC
	Misfire fault code description ME-SFI		AD07.61-P-4000-11A
    	A front left speed signal B rear left speed signal		Check ASR Suspension DMAN, Reg. 9
			AD42.45-P-1000AZ

	Speed signal fault code description, ME-SFI		AD07.61-P-4000-23A
    	Idle speed control implausible	Signal 1	AD07.61-P-6002-01A
		Signal 2	AD07.61-P-6002-01B

			AD07.61-P-6002-03A

	Idle speed control fault code description, ME-SFI		AD07.61-P-4000-24A
    	Power supply at ME-SFI [ME] control unit (N3/10)		AD07.61-P-6000-01A
			AD07.61-P-6000-02A

	Control unit power supply fault code description, ME-SFI		AD07.61-P-4000-59A
    	Cruise control switch variable (S40/4)		AD07.61-P-6003-01D
    	CAN of ESP		AD07.61-P-6000-34A
	CAN malfunctioning fault code description, ME-SFI		AD07.61-P-4000-26A
    	A ME-SFI [ME] control unit (N3/10) B ME-SFI [ME] control unit (N3/10)		N3/10
    	ME-SFI [ME] control unit (N3/10)		N3/10

เอกสารที่อ้างถึง