ar2000p1250gg

Remove oil from cooling and heating system

Tip ar · temă 20.00 · versiune 0203 · 2016-02-11

Valabil pentru: Engine 602.983 in model 461.321/322/326/327/335/336/365/366 Engine 606.964 in model 463.308/330/331 Engine 612.965 in model 463.322/323 Engine 612.966 in model 461.302/331/332/342/345 Engine 628.962 in model 463.309/332/333 Engine 642.884 in model 461.305/333/340/343/392 Engine 642.886 in model 463.306/336 Engine 642.886 in model 463.346 up to model year 2013 Engine 642.970 in model 463.303/340/341 Engine 642.975 in model 461.304/334/344/346

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 20 Răcire motor › 20.00 Generalităţi — Seria 461 (modele 302, 304, 305, 321, 322, 326, 327, 331, 332, 333, 334, 335, 336, 340, 342, 343, 344, 345, 346, 365, 366, 392) · Seria 463 (modele 303, 306, 308, 309, 322, 323, 330, 331, 332, 333, 336, 340, 341, 346) · Seria 602 (modele 983) · Seria 628 (modele 962)

EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.5 Circuit de lichid de răcire complet — Seria 461 (modele 302, 304, 305, 321, 322, 326, 327, 331, 332, 333, 334, 335, 336, 340, 342, 343, 344, 345, 346, 365, 366, 392) · Seria 463 (modele 303, 306, 308, 309, 322, 323, 330, 331, 332, 333, 336, 340, 341, 346) · Seria 602 (modele 983) · Seria 628 (modele 962)

EinPAS 39 Încălzire/Aerisire/Răcire › 39.15 Climatizare › 39.15.1 Informaţie de bază — Seria 461 (modele 302, 304, 305, 321, 322, 326, 327, 331, 332, 333, 334, 335, 336, 340, 342, 343, 344, 345, 346, 365, 366, 392) · Seria 463 (modele 303, 306, 308, 309, 322, 323, 330, 331, 332, 333, 336, 340, 341, 346) · Seria 602 (modele 983) · Seria 628 (modele 962)

Valabil și pentru motoare/cutii de viteze: 606 964, 612 965, 612 966, 642 884, 642 886, 642 970, 642 975

AR20.00-P-1250GG

Remove oil from cooling and heating system

21.01.2016

Engine

602.983 in model 461.321/322/326/327/335/336/365/366

Engine

606.964 in model 463.308/330/331

Engine

612.965 in model 463.322/323

Engine

612.966 in model 461.302/331/332/342/345

Engine

628.962 in model 463.309/332/333

Engine

642.884 in model 461.305/333/340/343/392

Engine

642.886 in model 463.306/336

Engine

642.886 in model 463.346

up to model year 2013

Engine

642.970 in model 463.303/340/341

Engine

642.975 in model 461.304/334/344/346

Remove oil from cooling and heating system

Shown on engine 606

3

Overflow tank

18

Radiator

20

Coolant thermostat

P20.00-0343-06

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Danger !

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Notes on coolant

AH20.00-N-2080-01A

Remove/install

1

Drain off coolant

Engine 642.886 in model 463.306/336
Engine 642.886 in model 463.346
up to model year 2013
Engine 642.970 in model 463.303/340/341

AP20.00-P-2082F

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331
Engine 612.965 in model 463.322/323
Engine 612.966 in model 461.302/331/332/342/345
Engine 628.962 in model 463.309/332/333

AP20.00-P-2080G

Engine 642.884 in model 461.305/333/340/343
Engine 642.975 in model 461.304/334/344/346

AP20.00-P-2080GX

Drain coolant at radiator (18).

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331
Also drain off coolant on crankcase.

2

Remove coolant thermostat (20)


Engine 642.884 in model 461.305/333/340/343/392
Engine 642.975 in model 461.304/334/344/346

AR20.10-P-2460GXA

Engine 642.886 in model 463.306/336
Engine 642.886 in model 463.346
up to model year 2013
Engine 642.970 in model 463.303/340/341

AR20.10-P-2460GY

Engine 612.965 in model 463.322/323
Engine 612.966 in model 461.302/331/332/342/345

AR20.10-P-2460GT

Engine 628.962 in model 463.309/332/333

AR20.10-P-2460GM

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331

AR20.10-P-2460GG

3.1

Install housing to remove oil from the cooling and heating system

Engine 612.965 in model 463.322/323
Engine 628.962 in model 463.309/332/333
Engine 642.884 in model 461.305/333/340/343/392
Engine 642.886 in model 463.306/336
Engine 642.886 in model 463.346
up to model year 2013
Engine 642.970 in model 463.303/340/341
Engine 642.975 in model 461.304/334/344/346

WF58.50-P-2000-01A

The housing may be used only for the purpose of removing oil and must be removed again after it has been rinsed.

3.2

Install housing of the coolant thermostat (20) without coolant thermostat (20)

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331

Remove oil

4

Set heater controls to maximum output


The heater of the vehicle must be set to the highest temperature stage.
The heater circuit will not be flushed otherwise.

5

Switch auxiliary heater to full output

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
with code H12 (Auxiliary heater)
Engine 606.964 in model 463.308/330/331
with code H12 (Auxiliary heater)
Engine 612.965 in model 463.322/323
with code H12 (Auxiliary heater)
Engine 612.966 in model 461.302/331/332/342/345
with code H12 (Auxiliary heater)
Engine 628.962 in model 463.309/332/333
with code H12 (Auxiliary heater)
Engine 642.884 in model 461.305/333/340/343/392
with code H12 (Auxiliary heater)
Engine 642.886 in model 463.306/336
with code H12 (Auxiliary heater)
Engine 642.886 in model 463.346
up to model year 2013
with code H12 (Auxiliary heater)
Engine 642.970 in model 463.303/340/341
with code H12 (Auxiliary heater)
Engine 642.975 in model 461.304/334/344/346
with code H12 (Auxiliary heater)

6

Fill cooling and heating system with rinsing solution

Engine 642.886 in model 463.306/336
Engine 642.886 in model 463.346
up to model year 2013
Engine 642.970 in model 463.303/340/341

AP20.00-P-2082F

Engine 642.884 in model 461.305/333/340/343/392
Engine 642.975 in model 461.304/334/344/346

AP20.00-P-2080GX

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331
Engine 612.965 in model 463.322/323
Engine 612.966 in model 461.302/331/332/342/345
Engine 628.962 in model 463.309/332/333

AP20.00-P-2080G

Mix the cleaner to a 5% flushing solution (10 l water, 0.5 l cleaner).

Cleaner for engine and cooling system for oil drag-in, 10 l

*BR00.45-Z-1009-04A

7

Run engine at moderate rpms to warm it up to about 80°C and hold at this temperature for about 5 minutes

8

Switch off engine and allow cooling system to cool down to about 50°C

9

Drain flushing solution completely

Observe environmental protection regulations of cleaner manufacturer.

10

Fill cooling system with fresh water, warm up for about 5 minutes and drain it off again

Engine 642.886 in model 463.306/336
Engine 642.886 in model 463.346
up to model year 2013
Engine 642.970 in model 463.303/340/341

AP20.00-P-2082F

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331
Engine 612.965 in model 463.322/323
Engine 612.966 in model 461.302/331/332/342/345
Engine 628.962 in model 463.309/332/333

AP20.00-P-2080G

Engine 642.884 in model 461.305/333/340/343/392
Engine 642.975 in model 461.304/334/344/346

AP20.00-P-2080GX

If necessary, repeat rinsing procedure with fresh water so that all rinsing solution is removed.

11

Check deoiling of the cooling and heating system

If necessary

Repeat flushing process.

Clean

12

Remove overflow tank (3) and clean it

Engine 602.983 in model 461.321/322/326/327/335/336/365/366
Engine 606.964 in model 463.308/330/331

The overflow tank (3) is installed in the front rights wheel arch.

13

Install in the reverse order

Check

14

Check cooling system for condition and leaktightness

AP20.00-P-2050G

Repair materials

Number

Designation

Order number

BR00.45-Z-1009-04A

Cleaner for engine and cooling system for oil drag-in, 10 l

A 002 986 42 71

Documente menționate