P20.00-2236-06
1 Cap
2 Expansion reservoir
3 Filling device
4 Adapter
5 Drain screw
6 Radiator
Modification notes
Drain | |||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
| Notes on coolant | ||
1 | Open engine hood | See Operator's Manual | |
2 | Unscrew the cap (1) on the expansion reservoir (2) | Turn the cap (1) counterclockwise one half-turn, release the pressure, and then unscrew the cap (1). | |
3 | Detach lower engine compartment paneling | ||
| Remove/install bottom engine compartment paneling | ||
4 | Unscrew drain plug (5) at radiator (6) and drain coolant | Collect coolant | |
Filling | |||
5 | Screw tight drain plug (5) at radiator (6) | ||
6 | Install lower engine compartment paneling. | ||
| Remove/install bottom engine compartment paneling | ||
7 | Connect filling device (3) with adapter (4) to expansion reservoir (2), evacuate cooling system and then fill | Use the adapter (4) from the brake fluid change device. Observe instruction manual from filling device (3) manufacturer. | |
| |||
| |||
Brake fluid change unit gotis://B_42/43.2_01 | |||
8 | Screw cap (1) onto expansion reservoir (2) | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
9 | Carry out engine test run | Until the cooling fan is switched on. | |
10 | Check coolant level, adjust to correct level if necessary. |
Cooling system
Number | Designation | Engine | ||
BF20.00-P-1001-02T | Cooling system | Total filling capacity | Liters | 6.6 |
Filling capacity of anticorrosion/ | Liters | 3.3 | ||
Filling capacity of anticorrosion/ | Liters | 3,6 | ||
Specifications for Operating Fluids | Sheet | |||
Filling device
450 589 20 63 00
Documente menționate
- ah2000n208001a Indicaţii pentru lichid de răcire
- ap2000p2010fg
- ar6120p1105ff
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.