P20.00-2236-06
1 Cap
2 Expansion reservoir
3 Filling device
4 Adapter
5 Drain screw
6 Radiator
Modification notes
Drain | |||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
| Notes on coolant | ||
1 | Open engine hood | See Operator's Manual | |
2 | Unscrew the cap (1) on the expansion reservoir (2) | Turn the cap (1) counterclockwise one half-turn, release the pressure, and then unscrew the cap (1). | |
3 | Detach lower engine compartment paneling | ||
| Remove/install bottom engine compartment paneling | ||
4 | Unscrew drain plug (5) at radiator (6) and drain coolant | Collect coolant | |
Filling | |||
5 | Screw tight drain plug (5) at radiator (6) | ||
6 | Install lower engine compartment paneling. | ||
| Remove/install bottom engine compartment paneling | ||
7 | Connect filling device (3) with adapter (4) to expansion reservoir (2), evacuate cooling system and then fill | Use the adapter (4) from the brake fluid change device. Observe instruction manual from filling device (3) manufacturer. | |
| |||
| |||
Brake fluid change unit gotis://B_42/43.2_01 | |||
8 | Screw cap (1) onto expansion reservoir (2) | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
9 | Carry out engine test run | Until the cooling fan is switched on. | |
10 | Check coolant level, adjust to correct level if necessary. |
Cooling system
Number | Designation | Engine | ||
BF20.00-P-1001-02T | Cooling system | Total filling capacity | Liters | 6.6 |
Filling capacity of anticorrosion/ | Liters | 3.3 | ||
Filling capacity of anticorrosion/ | Liters | 3,6 | ||
Specifications for Operating Fluids | Sheet | |||
Filling device
450 589 20 63 00
Referenced documents
- ah2000n208001a Notes on coolant
- ap2000p2010fg Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration
- ar6120p1105ff Remove/install bottom engine compartment paneling
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.