ap2000p2010ga

Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration

Tip ap · temă 20.00 · versiune 0110 · 2004-07-13

Valabil pentru: ENGINE 112.945 in MODELS 463.209 /232 /233 /244 /245 /250 ENGINE 113.962 in MODELS 463.206 /240 /241 /247 /248 /249 /254 ENGINE 113.982 in MODELS 463.241 /243 /246 ENGINE 113.993 in MODELS 463.270 /271

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 20 Răcire motor › 20.00 Generalităţi — Seria 463 (modele 206, 209, 232, 233, 240, 241, 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271)

EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.5 Circuit de lichid de răcire complet — Seria 463 (modele 206, 209, 232, 233, 240, 241, 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271)

Valabil și pentru motoare/cutii de viteze: 112 945, 113 962, 113 982, 113 993

AP20.00-P-2010GA

Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration

31.10.97

ENGINE 112.945 in MODELS 463.209 /232 /233 /244 /245 /250

ENGINE 113.962 in MODELS 463.206 /240 /241 /247 /248 /249 /254

ENGINE 113.982 in MODELS 463.241 /243 /246

ENGINE 113.993 in MODELS 463.270 /271

Engine cooling system - inspect fluid level, adjust to correct level. Inspect   
	anticorrosion/ antifreeze protection, adjust to correct concentration

P20.30-2016-01

Arrow Coolant level when engine cold

Check

Danger!

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

Notes on coolant

All engines

AH20.00-N-2080-01A

1

Open cap of expansion reservoir

2

Check coolant level, adjust to correct level if necessary.

The coolant level is on the marking (arrow) when the coolant is cold.

For coolant at operating temperature the coolant level is about 1 cm above the marking (arrow).

3

Inspect cooling system for leaks

Only if there is coolant loss and against a separate repair order.

Inspect cooling system for leaks

Only engines 112.945, 113.962/982

AR20.00-P-1010HA

4

Inspect anticorrosion/antifreeze agent in coolant and coolant composition, adjust to correct level if necessary

Only use approved anticorrosion or antifreeze agents.

*BF20.00-P-1001-02K

Cooling system

Number

Designation

Engine
112.945
in models 463.209/
232/233/244/
245/250

Engine
113.962
in models 463.206/ 240/241 /247/248 249/254

Engine
113.982
in models 463.241/243/246

BF20.00-P-1001-02K

Cooling system

Total capacity

Liters

11.5

12

11.9

Capacity of anticorrosion/ antifreeze agent down
to -37°C

Liters

5.8

6

5.95

Capacity of anticorrosion/ antifreeze agent down
to -45°C

Liters

6.4

6.6

6.55

Specifications for Operating Fluids

Sheet

BB00.40-P-0310-01A

BB00.40-P-0310-01A

BB00.40-P-0310-01A

Sheet

BB00.40-P-0325-00A

BB00.40-P-0325-00A

BB00.40-P-0325-00A

Cooling system

Number

Designation

Engine
113.993
in model
463.270/271

BF20.00-P-1001-02K

Cooling system

Total capacity

Liters

13.0

Capacity of anticorrosion/ antifreeze agent
down to -37 °C

Liters

6.5

Capacity of anticorrosion/ antifreeze agent
down to -45 °C

Liters

7.3

Specifications for Operating Fluids

Sheet

BB00.40-P-0310-01A

Sheet

BB00.40-P-0325-00A

Documente menționate