Assembly and covering work when painting the rear fender

AR98.00-P-0207MFA

Assembly and covering work when painting the rear fender

08.08.2019

Model

118

Model

177

Model

247

Shown on right rear fender in paint stage 2/3 in installed condition, shown on model 177.0

Shown on right rear fender in paint stage 2/3 in installed condition, shown on model 177.1

Shown on right rear fender in paint stage 2/3 in installed condition, shown on model 247.0

Shown on left rear fender in paint stage 3, shown on model 177.0

Shown on left rear fender in paint stage 3, shown on model 177.1

Shown on left rear fender in paint stage 3, shown on model 247.0

Topical note

Cleaning plastic cover plates of lamps

AH82.10-P-1002-01A

Topical note

Notes on paintwork repairs

AH98.00-P-9408-02A

General information on masking for paintwork

AH98.00-P-0200-01BK

Taping up, masking

1.1

Unfasten rear bumper.

Paint stage 3, if damaged area is not in the area of the bumper at the rear or paint stage 2.

AR88.20-P-2200MFA

1.2

Remove rear bumper.

Paint stage 3, if the damaged area is in the vicinity of the rear bumper.

AR88.20-P-2200MFA

2.1

Release longitudinal member panel.

Paint stage 3, if the damaged area is not in the vicinity of the longitudinal member panel or paint stage 2.

AR88.80-P-6000MFA

2.2

Remove longitudinal member panel.

Paint stage 3, if the damaged area is in the vicinity of the longitudinal member panel.

AR88.80-P-6000MFA

3

Remove rear lamp unit.

Model 118
Model 177
Model 247
Paint stage 3, if the damaged area is in the vicinity of the rear lamp unit.

Model 118.6, 177.0, 247.0/6

AR82.10-P-4731MFA

Model 118.3, 177.1/9

AR82.10-P-4731MFV

4.1

Release drip rail in area of roof frame at side.

Paint stage 3, if the damaged area is not in the vicinity of the drip rail or paint stage 2.

AR88.80-P-4000MFA

4.2

Remove drip rail.

Paint stage 3, if the damaged area is in the vicinity of the drip rail.

AR88.80-P-4000MFA

5

Mask off fender all the way round.

 https://xentry.daimler.com
Under category "Guidelines for paint technology".

6

Cover areas of vehicle that are not to be painted using film.

 https://xentry.daimler.com
Under category "Guidelines for paint technology".

7

Remove fuel filler flap.

Left side of vehicle. Paint stage 3 if the damaged area is not in the vicinity of the tank filler recess, or paint stage 2.

AR88.60-P-2001MFA

8.1

Mask off tank filler recess.

Left side of vehicle. Paint stage 3 if the damaged area is not in the vicinity of the tank filler recess, or paint stage 2.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

8.2

Remove tank filler recess.

Left side of vehicle. Paint stage 3, if the damaged area is in the vicinity of the tank filler recess.

AR88.60-P-2001MFA

9

Install fuel filler flap.

Left side of vehicle. Paint stage 3 if the damaged area is not in the vicinity of the tank filler recess, or paint stage 2.

AR88.60-P-2001MFA

10

Mask off inside of fuel filler flap and close fuel filler flap.

Left side of vehicle. Paint stage 3 if the damaged area is not in the vicinity of the tank filler recess, or paint stage 2.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

11

Remove cover from sealing frame on trunk lid.

Paint stage 3, if the damaged area is in the vicinity of the cover on the trunk lid sealing frame.

12

Mask off all openings using masking tape.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

13

Mask off rear fender all way round.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

14

Cover areas of vehicle that are not to be painted using film.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

Mask off, cover in paint stage 1E

15

Remove rear bumper.

AR88.20-P-2200MFA

16.1

Remove trailer hitch.

Model 118, 177, 247
with code 550 (Trailer coupling)

Model 118.3/6, 177.0/1, 247
with code 550 (Trailer coupling)

AR31.10-P-8000MFA

16.2

Remove rear crossmember under bumper.

Model 118, 177, 247.0
except code 550 (Trailer coupling)

17

Remove bracket for rear bumper.

18

Remove longitudinal member panel.

AR88.80-P-6000MFA

19

Remove rear lamp unit.

Model 118
Model 177
Model 247

Model 118.6, 177.0, 247.0/6

AR82.10-P-4731MFA

Model 118.3, 177.1/9

AR82.10-P-4731MFV

20

Remove fuel filler flap.

Left side of vehicle.

21

Remove tank filler recess.

Left side of vehicle.

AR88.60-P-2001MFA

22

Remove edge guard for trunk lid cutout.

23

Remove rear door.

AR72.12-P-0600MFA

24

Remove edge guard for door cutout of rear door.

25

Detach floor covering.

26

Remove rear fender liner.

AR88.10-P-1302MFA

27

Mask off all openings using masking tape.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

28

Mask off rear fender all the way round.

 https://xentry.daimler.com
Section "Guidelines for paint technology".

29

Cover areas of vehicle that are not to be painted using film.

 https://xentry.daimler.com
Section "Guidelines for paint technology".