201 589 00 51 00
129 589 00 98 00
Protective sleeve
Welding spot miller
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
P63.50-0326-09
1 Mill off welding spots and inert gas welding seams in the areas A and B. Separate flange facing C using a body saw.
Repair method (1) or (2) can be used depending on the extent of the damage.
The new part should be processed accordingly for repair method (2).
Remove deformed rear fender.
P63.50-0332-09
2 Mill off the remaining flange on the rear wheelhouse (area A). Then smooth-grind flange facings in the cross-hatched areas. Smooth-grind spot flanges on both sides. Paint the insides of the spot flanges with zinc-dust paint.