Remove/install detachable parts for replacing lower rear side wall paneling in front of wheel arch

AR60.00-D-0048TS

Remove/install detachable parts for replacing lower rear side wall paneling in front of wheel arch

15.01.2020

Model

907.6/7, 910.6

Shown on model 907.633 with code D03 (roof and rear-end doors, high version) except code T19 (left sliding door), left side of vehicle

Shown on model 907.6 except code W16 (front left window, fixed in the side wall/sliding door) and except code W18 (front lh sliding window in the side wall/sliding door) and except code W27 (rear left fixed window) and except code W35 (rear right sliding window) and except code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) and except code IR7 (wheelbase 4,325 mm, overhang 2,015 mm)

16

Electrical wiring harness

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910.6 with engine 780.703

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove respective wheel well trim.

Model 907.6, 910.6
with code V52 (Load-supporting wheel well)

AR68.30-D-0016TS

2

Remove respective side load compartment trim.

Model 907.6, 910.6
with code V25 (Basic panelling in load compart. up to belt rail)
Model 907.6, 910.6
with code VA1 (Panelling in load comp. up to belt rail standard)
Model 907.6, 910.6
with code VA2 (Load space int. trim up to roof (wood))
Model 907.6, 910.6
with code VA3 (Interior trim, cargo bay to roof height, washable)

AR68.30-D-1185TS

3

Remove tie-down rail from side wall.

Model 907.6, 910.6
with code V42 (Sidewall tie-down rails on waist rail)

AR68.50-D-8250TS

4

Remove respective rear side wall trim.

Model 907.6
with code V21 (Interior panelling luxury)
Model 907.7

AR68.30-D-1208TSR

5

Remove respective front side wall trim.

Model 907.6
with code V21 (Interior panelling luxury)
Model 907.7

AR68.30-D-1209TSR

6

Remove respective center side wall trim.

Model 907.6
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
with code V21 (Interior panelling luxury)
Model 907.6
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)
with code V21 (Interior panelling luxury)
Model 907.7
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
Model 907.7
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)

AR68.30-D-1211TSR

7

Remove respective electrical wiring harness (16) in the repair area and position outside of the working area.

8

Remove respective rear wheel.

AR40.10-D-1100TS

9

Remove respective protective strips.

AR88.80-D-1040TS

10

Remove respective grommets behind the protective strips.

11

Install in the reverse order.