Shown on removed AdBlue® container |
1 | Pump |
2 | Bolts |
D49.20-A003-06
3 | Seal |
D49.20-A014-01
Warning | Risk of burn injuries and scalding when working on AdBlue(R) lines and the component parts attached to them. Risk of injury to skin and eyes when handling AdBlue(R). Risk of poisoning caused by swallowing AdBlue(R) | Pour AdBlue® only into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Topical note | Notes on use, material properties and handling of NOx reducing agent | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove | ||
1 | Empty AdBlue® container. | ||
| 000 588 01 71 00 Extraction pump | ||
2 | Remove cap of the AdBlue® container. | ||
3 | Remove screws (2). | Dispose of bolts (2). Observe different lengths of the screws (2) and note down. | |
4 | Remove pump (1). | Only dispose of pump (1) after check of seals (3). | |
| Check | ||
5 | Check whether seals (3) are located on removed pump (1). | If seals (3) are not located on pump (1) | |
| |||
Remove seals (3) at AdBlue® tank. | |||
| Install | ||
6 | Install new pump (1). | | |
Use pump (1) with seals (3) from parts kit. | |||
7 | Screw in new screws (2). | Use screws (2) from the parts kit. Pay attention to different screw lengths (2). | |
8 | Install cap of the AdBlue® container. | ||
9 | Fill AdBlue® tank. | ||
| NOx reducing agent AUS 32 ("ADBlue(R)") for SCR systems | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Perform leak test with engine running. | Visual inspection only. |
Powiązane dokumenty
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- ah4920n000201a Wskazówki dotyczące właściwości, stosowania i postępowania z czynnikiem redukującym NOx
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar4920d201401ts
- ar4920d201402ts
- ar4920d2016ts
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as4920z000201a Niebezpieczeństwo oparzeń podczas prac przy przewodach AdBlue(R) i związanych z nimi elementach. Niebezpieczeństwo obrażeń skóry i oczu podczas kontaktu z AdBlue(R). Niebezpieczeństwo zatrucia na skutek połknięcia AdBlue(R).
- bb0040p035200a Czynnik redukujący NOx AUS 32 ("ADBlue(R)") do układów SCR
- ws1400p0013b