P01.30-2251-09
1 High-pressure pump
2 Air intake hose
3 Bracket
4 Bolts
9 Screw
10 Bracket
11 Bolts
12 Sealing ring
5 Water drain
6 Coolant hose
7 Clip
8 Rear cover
| Remove/install | ||
1 | Drain coolant | ||
2 | Remove cylinder head cover | ||
3 | Remove air filter housing | ||
4 | Remove high-pressure pump (1) | ||
5 | Unscrew bolts (4) of bracket (3) | ||
6 | Expose water drain (5) upward | ||
7 | Remove air intake hose (2) with bracket (3) | ||
8 | Loosen clamp (7) and remove coolant hose (6) | ||
9 | Unscrew bolt (9) on bracket (10) from rear cover (8) | ||
10 | Unscrew bolts (11) from rear cover (8) | | |
11 | Loosen rear cover (8) from guides in cylinder head and remove | Installation: Install new sealing ring (12). Clean sealing surfaces on rear cover (8) and cylinder head and coat with sealant. | |
Sealing compound | |||
12 | Install in the reverse order | ||
13 | Inspecting cooling system for leaks | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
14 | Conduct engine test run and check cylinder head in the area of the rear cover (8) for leaks | ||
15 | Check engine oil level by means of oil dipstick | Engine oil level must lie between the markings 'Min' and 'Max'; otherwise, engine damage may occur. |
Cylinder head
Repair materials
Number | Designation | Order number |
BR00.45-Z-1053-01A | Sealing compound | Q0000282V000000000 |
Powiązane dokumenty
- ar0120p5014fg
- ar0702p1020ff
- ar0910p1150fg
- ar2000p1010fg
- ar2000p1142fg
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.