ad0761p6002b

ME-SFI idle speed control/electronic accelerator - Testing electrical system

Type ad · thema 07.61 · versie 0104 · 2019-12-10

Geldig voor: Engine 113.940/942/943 up to 5/31/00, 113.961

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 07 Mengselvorming › 07.61 Benzine-inspuit- en ontstekingssysteem ME

Geldt ook voor motoren/versnellingsbakken: 113 940, 113 942, 113 943, 113 961

AD07.61-P-6002B

ME-SFI idle speed control/electronic accelerator - Testing electrical system

25.11.2019

Engine

113.940/942/943 up to 5/31/00, 113.961

Danger

Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.

Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Connecting and using test equipment

AD00.00-P-1000AZ

Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

AD07.61-P-2000B

ME-SFI fuel injection and ignition system (ME), DTC memory

Fault codes from P0000 to P0304

AD07.61-P-4000B

Fault codes from P0305 to P0743

AD07.61-P-4000BA

Fault codes from P0748 to P1747

AD07.61-P-4000BB

When disconnecting the couplings on the ME-SFI [ME] control unit, disconnect the center coupling first and reconnect the center coupling D last when reconnecting.

Measuring instrument/test connection column:

The numbers entered in brackets, such as e.g. in 1.0 (2A) mean:

A = coupling A in the wiring diagram

2 = connection 2 in the wiring diagram

Ignition OFF

Connect test wiring harness with contact box to ME-SFI [ME] control unit (N3/10) according to connection scheme. Plug with red marking is not yet required at present, as no function is available in the ME-SFI [ME] control unit as yet.

Check

1

Pedal value sensor signal, electrics test, idle speed control/electronic accelerator ME-SFI

Signal 1

AD07.61-P-6002-01C

2

Pedal value sensor signal, electrics test, idle speed control/electronic accelerator ME-SFI

Signal 2

AD07.61-P-6002-01D

3

Throttle valve actuator signal, electrics test, idle speed control/electronic accelerator ME-SFI

AD07.61-P-6002-03A

4

Throttle valve actuator actuation, electrics test, idle speed control/electronic accelerator ME-SFI

AD07.61-P-6002-04A

5

P/N detection, electrics test, idle speed control/electronic accelerator ME-SFI

With automatic transmission

AD07.61-P-6002-05B

Verwezen documenten