Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

AD07.61-P-2000B

Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

25.11.2019

Engine

113.940/942/943 up to 5/31/00, 113.961

-

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.

Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage to ignition system

AH15.10-P-0002-01D

Reading out the fault code with the pulse counter is not possible. When removing the couplings at the ME-SFI [ME] control unit, first remove the center coupling; during attachment, the center coupling D is the last to be attached.

Connecting and using test equipment

AD00.00-P-1000AZ

Connecting hand-held tester (HHT), reading fault memory

AD00.00-P-2000-03A

Socket box connection diagram - ME-SFI - testing of electrical system

AD07.61-P-2000-01A

Connector assignment for ME-SFI gasoline injection and ignition system

AD07.61-P-2000-02B

Signal images - ME-SFI - gasoline injection system

AD07.61-P-2000-03A

Notes on HHT for ME-SFI gasoline injection and ignition system

AD07.61-P-2000-04A

Tools for testing electrical system of ME-SFI fuel injection and ignition system

AD07.61-P-2000-06A

ME-SFI ignition system signal images

AD07.61-P-2000-07C

Notes on ME-SFI diagnostic trouble code memory

AD07.61-P-2000-10C

Tooling for fuel pressures - ME-SFI - testing of hydraulic system

AD07.61-P-2100-01A

ME-SFI fuel pressures test connection

AD07.61-P-2100-02B

Tools, fuel pump - ME-SFI hydraulic system testing

AD07.61-P-2200-01A

Connect socket box - ME-SFI - testing of fuel pump

AD07.61-P-2200-02B

Tools fuel injectors - Testing ME-SFI hydraulic system

AD07.61-P-2300-01A

Connect socket box - ME-SFI - testing of fuel injectors

AD07.61-P-2300-02B

Spray pattern - ME-SFI - testing of fuel injectors

AD07.61-P-2300-03B

Motor electronics (ME-SFI) fuel injection and ignition system arrangement of components

Engine 113.961 in model 129

GF07.61-P-0001-01P

Engine 113.942 up to 5/31/00 in model 163

GF07.61-P-0001-01Q

Engine 113.943 up to 5/31/00 in model 208

GF07.61-P-0001-01R

Engine 113.940 up to 5/31/00 in model 210

GF07.61-P-0001-01S

Overview of wiring diagrams for mixture formation

Model 208 group 00 and 07

PE07.00-P-1100D

Model 210 group 00 and 07

PE07.00-P-1100A