Remove/install fill level and SCR AdBlue temperature combination sensor · ar1440w2013b · Mercedes-Benz WIS

AR14.40-W-2013B

Remove/install fill level and SCR AdBlue temperature combination sensor

23.11.10

ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944, 958.4 with CODE (MS4) BlueTec 4

ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944, 958.4 with CODE (MS5) BlueTec 5

W14.40-1187-06

1 Electrical line

2 Electrical connector

3 Temperature sensor

4 O-ring

5 AdBlue tank

B117 Fill level and SCR AdBlue temperature combination sensor

 	Remove/install
 Danger!	Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue	Only pour AdBlue suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.	AS14.40-Z-0001-01A
	Notes on use, material properties and handling of AdBlue®		AH14.40-N-0001-01A
1	Switch off ignition
2	Disconnect electrical connector (2)
3	Pull electrical line (1) out of frame	 Installation: Replace removed cable tie.
4	Remove fill level and SCR AdBlue temperature combination sensor (B117) at AdBlue tank (5)	 If AdBlue drips escape from AdBlue tank (5) crystals of urea which form can be removed using water and a cleaning cloth.
5	Install in the reverse order

ah1440n000101a AdBlue の適用、物質特性、および取扱いに関する注意事項
as1440z000101a AdBlue ラインおよび接続している構成部品での作業では、火傷あるいは負傷の危険があります。 AdBlue を取り扱う際に、皮膚および目を負傷する危険があります。 AdBlue を誤飲する