Preface
This introductory information presents the technical innovations and modifications of the new Mercedes-Benz Sprinter model 907 and model 910. In particular, it is intended to provide information in the areas of service, maintenance/repair, and Aftersales. The reader should be familiar with Mercedes-Benz model series currently on the market.
The content-related focus of this introductory information lies in the presentation of new and modified major assemblies and systems.
This introductory information is not intended as a basis for repairs or for the diagnosis of technical problems. Further information for this purpose is available in the Workshop Information System (WIS). This is being updated continuously. The information stored there always corresponds to the state of the art of the vehicles.
The introductory information presents initial information about the new Mercedes-Benz Sprinter model 907 and model 910. The content of the introduction information is not subject to the Update Service. Supplements are not envisaged.
Modifications and new features are published in the corresponding literature types in the WIS.
The information in this introductory information corresponds to the status as of the copy deadline in March 2018. It may thus deviate from the actual series production configuration.
Introduction
The successor of Sprinter model 906 is presented in two versions. Sprinter model 907 with rear wheel drive replaces model 906. With model 910, a Sprinter with front wheel drive is being offered for the first time.
Focuses of the Sprinter model 907 and model 910 product design compared with the previous model series are:
New design elements for the exterior, side wall, and doors
New radiator grille options
Optionally painted bumpers in one of four colors
New design of the exterior lighting
Redesigned instrument clusters and instrument panel with modular stowage concept
New Telematics Generation with 7" or 10.25" touchscreen
High-performance roof-mounted air conditioning system for tourers and panel vans
New networking architecture
Front wheel drive with transversely mounted engine (model 910)
Operation of the automatic transmission via control levers or gearshift paddles on the steering wheel
Lowering of loading floor by 80 mm from B-pillar rear edge (model 910)
Increased load capacity through weight reduction (model 910)
Referenced documents
- sn0000d000102a Overall vehicle
- sn0000d008002a Suspension
- sn0000d008003a Information, multimedia and communications systems
- sn0000d008005a Comfort systems
- sn0000d008006a Occupant protection
- sn0000d008007a Driver assistance systems
- sn0000d008008a Maintenance strategy
- sn0000d008009a Exterior lighting
- sn0000d008010a Body
- sn0000d008011a Overview of special tools
- sn0000d008012a Networking, on-board electrical system
- sn0000d008013a Drive
- sn0000d300301a Model survey
- sn0010d001002a Technical data