of0010w300019a

Test sheet for fault analysis in the case of irregular tire wear, form

Type of · topic 00.10 · version 0102 · 2011-11-29

Applies to: MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.10 Complete vehicle, technical data, tests required by law — Series 374 · Series 375 · Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 20 Chassis › 20.30 Wheel/tire › 20.30.30 Wheel/tire/spare wheel — Series 374 · Series 375 · Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

OF00.10-W-3000-19A

Test sheet for fault analysis in the case of irregular tire wear, form

MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

Branch/Agency company no. Customer

Vehicle ident No. Repair order no.

Tester: Name Date

License plate No. Original registration date Model Engine no. odometer reading: km/miles

Contact person: Telephone/fax:

Body type:

Vehicle service: Long-distance haulage Distribution haulage Construction-site service Mixed service

To enable precise inspection, the vehicle must be checked when loaded and the test sheet must be completed.

Tire data

Tire size:

Make:

Tire designation:

DOT no.:

Load index:

1st front axle

Left Right

2nd front axle

Left Right

Tire size:

Make:

Tire designation:

DOT no.:

Load index:

1st rear axle

Left Right

2nd rear axle

Left Right

Tire retreaded Yes No

Tire tread

1st front axle Off-road tread Regular tread Traction tread

Front axle 2 Off-road tread Regular tread Traction tread

1st rear axle Off-road tread Regular tread Traction tread

Rear axle 2 Off-road tread Regular tread Traction tread

Left

Right

2nd rear axle

Before starting measuring procedure: Check play of wheel bearings and steering geometry.

1st rear axle

i

Tire pressure measured (tire cold)

bar/psi

Tread depth measured

mm

outside

center

inside

Tire vertical runout

mm

Rim lateral runout

mm

a

i

a

i

a

i*

Right

Left

o*

Front axle 2

Right

Left

1st front axle

Left

Right

* o = Outside, i = Inside

Have wheelbase changes been performed on the vehicle? No Yes Changed wheelbase: mm

Axle loads

Front axle 1: kg Front axle 2: kg Rear axle 1: kg Rear axle 2: kg

Alignment of front wheels

Front axle 2

1st front axle

Front axle 2

1st front axle

Before the correction

After the correction

Left

Right

Left

Right

Left

Right

Left

Right

Total toe (+/-)

Degrees/mm

Travel direction relative to steering center

Degrees/mm

Camber (+/-)

Degrees

Caster

Degrees

Steering axis inclination

Degrees

Toe-out on turns (left lock)

Degrees

Toe-out on turns (right lock)

Degrees

Steering angle max.

Degrees

20°

20°

20°

20°

Remarks/Description of tire wear

If there is irregular tire wear, please send the completed test sheet to your contact person at the MPC/MBVD.