GF82.85-P-2012RC | Navigation mode, function | 24.1.08 |
MODEL 171 with CODE (525) MB Audio 50 APS radio
MODEL 171 with CODE (511) Audio 50 APS with DVD changer
MODEL 171 as of model year 09/YoM 08 model refinement package
Function requirements
Status "Circuit 30 ON"
Auto pilot system (APS) is switched on, authorized and working correctly
No fault on global positioning system (GPS) antenna system
Signals available from at least 3 GPS satellites
-----------------------------------------------------------------------------------------
General information on navigation
The location of the vehicle, as well as the direction and distance to the destination are determined with the aid of the navigation system after entering the following information:
- Country
- Town name
- Street
- Intersection or house number (depending on availability of the data)
- Town centers
- ZIP code
- Points of interest (POI)
-----------------------------------------------------------------------------------------
After the destination and street have been entered, the following computer models can be selected:
- Quickest route
- Shortest route
- Dynamic route
In addition, other route options can be selected:
- Avoid freeway
- Avoid toll road
- Avoid roads requiring toll stickers
- Avoid ferries or vehicle shipments
- Avoid tunnels
-----------------------------------------------------------------------------------------
The "Special Destinations" menu is supplemented by the "Bypassing current location", "Bypassing other Locations" and "National Destinations" submenus. POI categories are, e.g.:
- Junctions
- Highway service
- Airport
- Hotel or motel
- Hospital
- Parking lot
- Restaurant
After entering or calling a destination location, route calculation starts.
-----------------------------------------------------------------------------------------
Function sequence
The navigation system integrated into the radio and navigation unit (A2/56) uses the data entered to calculate the data required to reach the destination (destination-oriented navigation). Further partial functions are described in separate documents:
Position finding and destination-oriented navigation, function
Route guidance through voice output, function
The route is calculated in accordance with the options set. If observance of the options is not possible, then the options set are ignored for the sections in question and a message is displayed and signaled audibly. The set options can be displayed and changed at any time. After the calculation, the route is indicated by arrow symbols on the display of the radio and navigation unit and in the instrument cluster (A1).
-----------------------------------------------------------------------------------------
An acoustic announcement is then made, saying "The route is calculated".
If the vehicle is no longer moving on the pre-calculated route, then the route is recalculated. If the recalculated values are plausible for the navigation system, then the modified route is displayed. An alternative route is offered under dynamic route guidance if there is a traffic jam or a road block on the calculated route.
The system can be activated or deactivated or the destination and street can be entered using the following components:
- Left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111)
- Control panels on the radio and navigation unit
- VCS [SBS] switch (S93/2) of the voice control system (VCS [SBS]), with code (511) Audio 50 APS with DVD changer
-----------------------------------------------------------------------------------------
The control signals of the left multifunction steering wheel button group and the right multifunction steering wheel button group are routed to the radio and navigation unit via the following:
- Steering LIN
- Steering column tube module (N80)
- Interior CAN
The control signals of the VCS [SBS] switch, with code (511) Audio 50 APS with DVD changer, are routed to the radio and navigation unit via the following:
- Direct line
- Steering column tube module
- Interior CAN
The control signals are processed within the device for direct entries via the control panels on the radio and navigation unit.
Referenced documents
- gf8261p2010rc Position finding and destination-oriented navigation, function
- gf8261p2010rca Position finding and destination-oriented navigation, function
- gf8261p2010rcj Position finding and destination-oriented navigation, function
- gf8261p2011rc Route guidance through voice output, function
- gf8261p2011rca Route guidance through voice output, function
- gf8261p2011rcj Route guidance through voice output, function
- pe8261p205497ta Electrical function diagram for navigation mode (APS), function