Knife
000 589 12 28 00
D83.70-0143-01
1 Cut fuel feed line (1) of automotive engine beneath driver's seat box
with knife and remove about 50 mm of line.
2 Insert two support sleeves (6) into ends of severed fuel feed line (1) and insert T-piece (3) with two connector hoses (2) into fuel feed line.
The fuel feed line support sleeves (6) must lie beneath the outer hose clamp of the two connector hoses (2). The fuel metering pump connection to the T-piece must point vertically downwards.
3 Connect flexible fuel line (5) to T-piece with a connector hose (4) for connecting to fuel metering pump.
D83.70-1234-02
4 Attach fuel metering pump (8) with rubber-lined clamp (10) and rubber buffer (11) to a free hole in the floor of the vehicle.
Observe installation position of fuel metering pump. Pump must have an upslope of at least 15o towards the thrust side. The most favorable installation position lies between
15 and 35o.
5 Cut flexible fuel line (5) from fuel feed line branch-off to length with
knife at fuel metering pump intake end and connect with a connector hose (7).
6 Connect flexible fuel line (9) to thrust side of fuel metering pump with a connector hose (7) for connecting to air heater.
D83.70-1254-01
7 Route fuel line (9) toward rear in vicinity of fuel tank and route to air heater connecting pipe through breakthrough in rear cab crossmember (arrow).
8 Cut fuel line to size with knife on air heater connecting pipe and connect with connector hose.
Connect fuel line to underfloor and existing lines or branches. Avoid kinks and chafing points. Fit chafe guard in cab crossmember area (arrow).