MODEL | 930, 932, 933, 934 |
with CODE DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter)) | |
with CODE F04 (Cab L (long)) | |
without CODE DD2 (Cab with 1550 mm floor-to-ceiling height) | |
without CODE EX3 (Provision for fitting telematics) | |
without CODE F02 (Cab L (long) / Single Cab) | |
without CODE F05 (Cab M (medium-long)) | |
without CODE F07 (Cab S (short)) | |
without CODE F15 (MEGASPACE cab) | |
without CODE F18 (MEGASPACE cab/single cab) | |
MODEL | 930, 932, 933, 934 |
with CODE DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter)) | |
with CODE F05 (Cab M (medium-long)) | |
without CODE DD2 (Cab with 1550 mm floor-to-ceiling height) | |
without CODE EX3 (Provision for fitting telematics) | |
without CODE F02 (Cab L (long) / Single Cab) | |
without CODE F04 (Cab L (long)) | |
without CODE F07 (Cab S (short)) | |
without CODE F15 (MEGASPACE cab) | |
without CODE F18 (MEGASPACE cab/single cab) |
A119 | FleetBoard®vehicle computer |
A120 | FleetBoard®DispoPilot |
W82.85-1684-06
| Remove | ||
1 | Disconnect ground line from battery | ||
| |||
2 | Remove paneling at top for instrument panel on the passenger side | ||
| Vehicles with CODE FN1 (Distributor cockpit) | ||
| Vehicles with CODE FN2 (Comfort cockpit) | ||
3 | Remove paneling from passenger-side A-pillar | ||
| |||
The support rod must be reattached to the A-pillar for the duration of the installation process after removing the paneling. | |||
4 | Remove roof speaker at front passenger side. | Only on vehicles with digital tachograph (DCTO). | |
5 | Remove air vent in center of instrument panel | ||
6.1 | Remove seat with mounting console on passenger side | Vehicles without code SF0 (Front passenger function seat) or without code SF1 (Front passenger function seat, velour) | |
| |||
6.2 | Remove passenger seat | Vehicles with code SF0 (Front passenger function seat) or with code SF1 (Front passenger function seat, velour) | |
| |||
7 | Remove door sill trim, support rod and floor mat at driver side | ||
| |||
8 | Remove door module at driver-side | ||
| Only on vehicles with code EX8 (Preinstallation for distance-related toll calculation) and without code ET8 (Auto pilot system (APS) with dynamic destination-oriented navigation system). | ||
9 | Remove door module at passenger side | ||
| Only on vehicles without code EX8 (Preinstallation for distance-related toll calculation). | ||
10 | Remove instrument (INS) | ||
| Only on vehicles with code EX8 (Preinstallation for distance-related toll calculation). | ||
11 | Remove footwell cover on the driver side | ||
| Only on vehicles with code EX8 (Preinstallation for distance-related toll calculation). | ||
| Install | ||
12 | Retrofit main wiring harness for FleetBoard® telematics platform |
| |
Vehicles with code MS4 (BlueTec 4) or with code MS5 (BlueTec 5) | |||
Pay attention to electrical wiring diagram: | |||
| |||
Electrical connection scheme for FleetBoard® telematics when retrofitting | |||
13 | Retrofit wiring harness for FleetBoard® DispoPilot (A120) | ||
14 | Retrofit GPS antenna in wide-angle rearview mirror at passenger side |
| |
15 | Retrofit GPS antenna in wide-angle rearview mirror at driver side |
| |
16 | Retrofit line for GPS antenna. |
| |
Vehicles with code EX8 (Preinstallation for distance-related toll calculation) and with code ET8 (Auto pilot system (APS) with dynamic destination-oriented navigation system) | |||
Vehicles with code EX8 (Preinstallation for distance-related toll calculation) and without code ET8 (Auto pilot system (APS) with dynamic destination-oriented navigation system) | |||
17 | Retrofit GSM antenna | ||
18 | Retrofit bracket for FleetBoard® vehicle computer (A119) | ||
19 | Connect and install FleetBoard® vehicle computer (A119) | ||
20 | Prepare FleetBoard® DispoPilot (A120) for installation | ||
21 | Connect and install FleetBoard® DispoPilot (A120) | ||
22 | Fill out FleetBoard® initial startup form and send in by fax | ||
| |||
The FleetBoard® administrator will establish contact after receiving the fax to log the vehicle on to the FleetBoard® server. | |||
23 | Install footwell cover at driver side | ||
| Only on vehicles with code EX8 (Preinstallation for distance-related toll calculation). | ||
24 | Install instrument cluster (INS) | ||
| Only on vehicles with code EX8 (Preinstallation for distance-related toll calculation). | ||
25 | Install door module at driver-side | ||
| Only on vehicles with code EX8 (Preinstallation for distance-related toll calculation) and without code ET8 (Auto pilot system (APS) with dynamic destination-oriented navigation system). | ||
26 | Install door module at passenger side | ||
| Only on vehicles without code EX8 (Preinstallation for distance-related toll calculation). | ||
27 | Install door sill trim, support rod and floor mat at passenger side | ||
| |||
28.1 | Install seat with mounting console on passenger side | Vehicles without code SF0 (Front passenger function seat) or without code SF1 (Front passenger function seat, velour) | |
| |||
28.2 | Install front passenger seat | Vehicles with code SF0 (Front passenger function seat) or with code SF1 (Front passenger function seat, velour) | |
| |||
29 | Install air vent in center of instrument panel | ||
30 | Install roof speaker at passenger side. | Only on vehicles with digital tachograph (DCTO). | |
31 | Install paneling to passenger-side A-pillar | ||
| |||
32 | Install paneling at top for instrument panel on the passenger side | ||
| Vehicles with CODE FN1 (Distributor cockpit) | ||
| Vehicles with CODE FN2 (Comfort cockpit) | ||
33 | Connect ground cable to battery | ||
| |||
34 | Adapt software in base module (GM) | Only on vehicles up to vehicle identification end number L 075171. | |
| |||
35 | Activate FleetBoard® DispoPilot (A120) and FleetBoard® vehicle computer (A119) in vehicle using Star Diagnosis |
Parts ordering note |
Part no. | Designation | Quantity |
A 930 002 41 99 | Parts kit for FleetBoard® preinstallation, code EX3 | n. B. |
A 930 002 45 99 | FleetBoard® vehicle computer | 1 |
A 930 002 51 99 | DispoPilot mobile upgrade parts kit | 1 |
A 930 002 54 99 | Universal bracket for DispoPilot Truck | 1 |
A 930 001 87 99 | Parts kit for car transporter | 1 |
Ordering address for operating instructions. Within Germany: Using the After-Sales portal on the Internet or as an alternative by email: [email protected], telephone: +49-1805/010-7979, fax: +49-1805/010-7978. Outside Germany: Please consult the contact person responsible for your market. | ||
6462 2734 76 | FleetBoard® operator's manual in German, English, French, Polish, Czech, Romanian, Bulgarian, Dutch, Italian, Spanish | n. B. |
6462 2732 41 | DispoPilot operator's manual in German, English, French | n. B. |
6462 2732 76 | DispoPilot operator's manual in Polish, Czech, Romanian, Bulgarian | n. B. |
6462 2733 76 | DispoPilot operator's manual in Dutch, Italian, Spanish | n. B. |
Referenced documents
- ar5410w0003a Disconnect/connect battery ground line
- ar5421w1241a Adapt software in the base module
- ar5430w6027e Removing and installing instrument (INS)
- ar6810w3435ac Remove, install upper paneling for instrument panel on passenger side
- ar6810w3435ad Remove, install upper paneling for instrument panel on passenger side
- ar6830w1310c Remove/install footwell cover at driver side
- ar6830w4050a Remove/install paneling on A-pillar
- ar6830w4410a Remove/install scuff plate, support rod and right foot mat
- ar7210w0900a Remove/install door module
- ar9110w1020a Remove/install passenger seat
- ar9110w3300a Remove/install seat with console
- az8261w000302a Retrofit GPS antenna
- az8270w000902a Retrofit GSM antenna
- az8285w000105i Retrofit Fleetboard Telematics platform main wiring harness
- az8285w000105j Retrofit Fleetboard Telematics platform main wiring harness
- az8285w000106a Retrofit GPS antenna line
- az8285w000106b Retrofit GPS antenna line
- az8285w000106c Retrofit GPS antenna line
- az8285w000107e Electrical connection diagram for FleetBoard telematics when retrofitting
- az8285w100011a Enabling the FleetBoard telematics platform in the vehicle
- az8285w200503b Retrofit Fleetboard DispoPilot wiring harness
- az8285w200504a Prepare FleetBoard DispoPilot for installation
- az8285w200505a Connect and install FleetBoard DispoPilot
- az8285w200601m Connect and install FleetBoard vehicle computer
- az8285w200602a Retrofit bracket for Fleetboard vehicle computer
- of8285w300002a FleetBoard initial startup, form