Warning | Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated. | |
Warning | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on working on hydraulic hoses | ||
Topical note | Brake fluid notes | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove platform. | ||
2 | Remove hood. | ||
3 | Remove air filter housing. |
| |
4 | Remove on-board electrical system battery. | ||
5.1 | Remove radiator unit. | Model 470, 471 with engine 642 | |
5.2 | Remove radiator. | Model 470, 471 with engine 699 | |
6 | Remove the coolant expansion reservoir. |
| |
7 | Remove the condenser. |
| |
8 | Remove front bumper. | ||
9 | Remove charge air cooler. |
| |
10.1 | Disconnect engine wiring harness for removal of the engine. | Model 470, 471 with engine 642 | |
M6 | |||
M8 | |||
Screw/bolt, alternator to crankcase | |||
Nut, electric line to prefuse box | |||
10.2 | Remove electric lines to remove the engine. | Model 470, 471 with engine 699 | |
M6 | |||
11 | Remove front fender liners. | ||
12 | Remove differential pressure sensor. |
| |
Model 470, 471 with engine 699 | |||
13 | Remove vacuum line of the brake booster from the brake booster. | ||
14 | Remove cooler of the power steering from the front carrier. | ||
Do not remove hydraulic hoses. Swivel cooler out of the working area. | |||
15 | Remove driver's cab from the chassis. | ||
Commercially available devices/tools | |||
Bolt, frame to cab | |||
Nut, brake cable bracket to body | |||
Union nut, brake line to brake line for connecting point/cab/frame | |||
Union nut, hydraulic line to hydraulic line for connecting point for cab/frame | |||
Screw, refrigerant line to refrigerant line front connecting point | |||
Screw/bolt, steering coupling to steering gear | |||
MB brake paste Molykote (copper colored) | |||
Assembly cleaner | |||
Pliers for click clamps | |||
Hose clamp pliers | |||
Retainer device | |||
Record plug | |||
Assembly tool | |||
16 | Remove propeller shaft of front axle differential. | Model 470, 471 with engine 642 | |
17 | Remove propeller shaft. |
| |
Model 470, 471 with engine 699 | |||
18 | Remove clutch slave cylinder. |
| |
Do not separate hydraulic line. | |||
19 | Remove diesel particulate filter. |
| |
20 | Remove engine with transmission from chassis. | ||
Commercially available devices/tools | |||
Model 470, 471 with engine 699Clamp, diesel particulate filter to exhaust pipe | |||
Banjo bolt, high-pressure line to power steering pump | |||
Bolt, holder for hydraulic hose/line to body | |||
Nut, rear engine mount to rear engine support | |||
Bolt, engine mount to frame-type integral support | |||
Support plate | |||
Clamp | |||
21 | Remove front crossmember. | ||
22 | Remove the rear engine support. | ||
23 | Remove trailer hitch. | Model 470, 471 with code Q22 (non-removable ball head trailer coupling) | |
24 | Remove spare wheel. | See owner's manual. | |
25 | Remove fuel tank. | ||
26 | Remove NOx reducing agent tank. |
| |
Model 470 with engine 699 | |||
27 | Remove detachable parts from frame. | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Screw, towing eye with bracket to longitudinal frame member | |||
Screw, rear crossmember to longitudinal frame member | |||
Bolt, lower front cross member to longitudinal frame member | |||
Union nut, brake line to brake hose | |||
Bolt/nut, frame to cross member | |||
M8 | |||
M6 | |||
Record plug | |||
28 | Remove rear axle from frame. | ||
| 000 588 10 62 00 Support plate | ||
| 000 588 11 62 00 Major assembly mount | ||
Screw/bolt, rear brake cable bracket to body/rear axle/brake carrier plate | |||
Nut, shock absorber to body | |||
Nut, stabilizer bar linkage to rear axle/longitudinal member stabilizer bar | |||
Bolt/nut, transverse control arm to frame | |||
Bolt/nut, upper trailing arm to frame | |||
Bolt/nut, lower trailing arm to frame | |||
29 | Completely remove exhaust system from frame. | ||
M8 | |||
30 | Remove front axle halves. |
| |
Model 470, 471 with engine 642 | |||
31 | Remove top transverse control arm. | ||
32 | Remove front stabilizer. | ||
33 | Remove front axle differential. |
| |
34 | Remove front axle detachable parts from frame. | ||
M6 | |||
Nut, steering gear to body | |||
Nut, panel to front axle carrier | |||
35 | Install in the reverse order. |
171 589 00 37 00
Pliers for click clamps
129 589 01 21 00
Retainer device
000 589 93 63 00
Assembly tool
000 589 54 37 00
Clamp
454 589 00 37 00
Hose clamp pliers
906 589 01 62 00
Support plate
129 589 00 91 00
Record plug
Referenced documents
- ah0000p001501cw Note on calculation of tightening torque when using insertion or socket tools with various effective lengths
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ah2520s000302p Notes on working on hydraulic hoses
- ah4250p000101a Brake fluid notes
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar0110s000401p Remove/install engine with transmission on chassis
- ar0110s240016pd Detach/attach electrical lines for removal of engine
- ar0704s0025pd Remove/install differential pressure sensor
- ar0704s0025ps Remove/install differential pressure sensor
- ar0910s1150pd Remove/install air filter housing
- ar0941s6817ps Remove/install charge air cooler
- ar1440s0012pd Remove/install NOx reducing agent tank
- ar1518s100005ps Disconnect/connect engine wiring harness to remove engine
- ar2020s3865pd Remove/install radiator
- ar2020s3871ps Remove/install radiator unit
- ar2030s4949ps Remove/install coolant expansion reservoir
- ar2210s4360pd Remove/install rear engine support
- ar2520s0151p Remove/install clutch slave cylinder
- ar3110s8000p Remove/install trailer hitch
- ar3130s4115p Remove/install front crossmember
- ar3235s2050p Remove/install front stabilizer bar
- ar3300s000401p Remove/install detachable parts for front axle on frame
- ar3310s0200p Remove/install front axle half
- ar3310s0200pu Remove/install front axle half
- ar3320s0500p Remove/install upper control arm
- ar3330s0525p Remove/install front axle gear
- ar3510s003601p Remove/install rear axle on frame
- ar4110s0050p Remove/install propeller shaft
- ar4110s0050pu Remove/install propeller shaft
- ar4110s0070p Remove/install front axle differential propeller shaft
- ar4310s0355p
- ar4310s0355p Remove/install brake booster vacuum line
- ar4625s3020p Remove/install power steering radiator
- ar4710s4100p Remove/install fuel tank
- ar4900s000401p Remove/install exhaust system assembly on frame
- ar4920s1200ps Remove/install diesel particulate filter
- ar4920s2014pda Remove/install AdBlue(R) tank
- ar5410s0005p Remove/install battery
- ar6000s003601p Remove/install detachable parts on frame
- ar6030s0001pa Remove/install platform
- ar6080s000401p Remove/install driver's cab on chassis
- ar8330s6540pd Remove/install condenser
- ar8810s1301p Remove/install front fender liner
- ar8820s2000p Remove/install front bumper
- ar8840s3000p Remove/install engine hood
- as0000z001301a Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- as4250z000101a Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid
- as8300z000601a Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts
- ws0100p0092b 000 588 11 62 00 Major assembly mount
- ws2600p3309b 000 588 10 62 00 Support plate