P15.10-2413-09
Shown on engine 157 |
1 | Front engine covers | B6/4 | Left intake camshaft Hall sensor | B6/6 | Left exhaust camshaft Hall sensor | ||
3 | Screw/bolts | B6/5 | Right intake camshaft Hall sensor | B6/7 | Right exhaust camshaft Hall sensor |
| Remove/install | ||
1 | Remove front engine covers (1) | When removing intake camshaft Hall sensors (B6/4, B6/5) | |
2 | Remove engine air intake duct upstream of air filter | When removing exhaust camshaft Hall sensors (B6/6, B6/7) | |
3 | Detach purge line from cylinder head cover | When removing the Hall sensor for the left exhaust camshaft (B6/4) | |
4 | Detach electrical connection from the respective camshaft Hall sensor (B6/4, B6/5, B6/6, B6/7) | ||
5 | Remove screw/bolt (3) and pull respective camshaft Hall sensor (B6/4, B6/5, B6/6, B6/7) out of the cylinder head cover | Installation: Replace sealing ring of the respective Hall sensor. | |
Bolt, camshaft Hall sensor to cylinder head cover | |||
6 | Install in the reverse order | ||
7 | Read out fault memory using the diagnostic system and clear if necessary | ||
| |||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Carry out an engine test run, checking the engine for proper operation and leaktightness |
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.