ar0100d1200c

Test compression pressure

Type ar · topic 01.00 · version 0103 · 2011-02-22

Applies to: ENGINES 111.979 in MODEL 901, 902, 903, 904

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 901 · Series 902 · Series 903 · Series 904

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 901 · Series 902 · Series 903 · Series 904

Also applies to engines/gearboxes: 111 979

AR01.00-D-1200C

Test compression pressure

10.2.11

ENGINES 111.979 in MODEL 901, 902, 903, 904

Test compression pressure

D01.00-1002-12

1 Compression recorder

2 Angle connection

3 Intermediate piece

4 Sealing cone

Remove/install

1

Warm up engine to normal operating temperature

Coolant temperature approx. 80 °C.

2

Switch off ignition

3

Remove spark plugs

AP15.10-D-1580A

4

Connect compression recorder (1)

AR01.10-D-0010-01A

*001589762100

*201589009900

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Crank engine with the contact switch of the compression recorder (1)

Crank engine several times to eliminate combustion residues.

Checking

6

Assemble compression recorder (1) with sealing cone (4), adapter (3) and angle connection (2)

7

Insert diagram chart into compression recorder (1)

8

Press sealing cone (4) into the spark plug bore of the relevant cylinder

9

Open throttle valve fully

10

Crank engine with the contact switch of the compression recorder (1)

by at least eight revolutions and simultaneously press the sealing cone (4) firmly into the spark plug bore.

11

Inspect remaining cylinders in the same way

12

Compare measurements obtained with the specified pressures

*BE01.00-N-1001-01A

*BE01.00-N-1002-01A

*BE01.00-N-1003-01A

If the pressure is below the minimum compression pressure or if the permissible difference between the individual cylinders is exceeded.

Check cylinder leakage.

AR01.00-D-1300C

13

Remove compression recorder (1)

14

Install in the reverse order

Check values for compression pressure

Number

Designation

Engine 111.979

BE01.00-N-1001-01A

When new

bar

10-12

BE01.00-N-1002-01A

Wear limit (limit value)

bar

10.5

BE01.00-N-1003-01A

Permissible difference between individual cylinders

bar

1.5

Test compression pressure
Test compression pressure

001 589 76 21 00

201 589 00 99 00

Electrical connection set

Compression tester

Referenced documents