P47.20-0218-06
Illustrated on model 140
51 Clamp
52 Fuel pressure hose
53 Fuel suction hose
55 Fuel filter
56 Plastic foil
57 Holder
59 Hollow bolt
62 Sealing ring
69 Guard case
| Removal, installation and replacement | ||
Danger! | Risk of explosion as a result of fuel vapors igniting. Risk of poisoning as a result of inhaling fuel vapors. Risk of injury as a result of fuel coming into contact with skin and eyes. | No fire, naked flame or smoking. Wear protective clothing when handling fuel. | |
1 | Release pressure in fuel tank | Open cap | |
2 | Disconnect fuel suction hose (53) and fuel pressure hose (52) | | |
3 | Disconnect fuel pressure hose (52) from fuel filter | Hold on double threaded fitting | |
and loosen hose clamps | Use clamps listed in parts microfiche for replacement | ||
4 | Install new filter with plastic foil (56) | Install plastic foil so that it extends on both sides of holder (57). | |
Danger! | Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running. | Secure vehicle to prevent it starting off. | |
5 | Start engine, check fuel system for leakage |
Fuel pump
Number | Designation | Engine 104, 119, 120 | |
BA47.20-P-1001-01A | Hollow bolt for fuel line on fuel pump or fuel filter | Nm | 27 |
000 589 40 37 00
Clamp
Referenced documents
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.