ap2000t2010ca

Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration

Type ap · topic 20.00 · version 0101 · 2006-07-26

Applies to: ENGINE 457.944 in MODELNMB613.367 ENGINE 457.941 in MODELNMB613.368

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 613 (models 367, 368)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 613 (models 367, 368)

Also applies to engines/gearboxes: 457 941, 457 944

AP20.00-T-2010CA

Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration

21.5.02

ENGINE 457.944 in MODELNMB613.367

ENGINE 457.941 in MODELNMB613.368

Engine cooling system - inspect fluid level, adjust to correct level. Inspect   
	anticorrosion/ antifreeze protection, adjust to correct concentration

T20.00-0028-01

Shown on model 613.368

1 Cap

Testing

Danger!

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

Notes on coolant

All engines

AH20.00-N-2080-01A

1

Inspect coolant level

Check and correct engine coolant level only when coolant temperature is below 50 °C.

Before adjusting correctly engine coolant level, check anticorrosion/antifreeze protection.

The cooling system is correctly filled if the coolant level is between the minimum and maximum markings (arrows).

2

Take off cap (1)

3

Inspect anticorrosion/antifreeze protection

Insufficient anticorrosion/antifreeze protection:

*WH58.30-Z-1001-25A

Adjust to correct concentration anticorrosion/antifreeze protection
(subject to separate repair order).

AP20.00-T-2010-01CA

*BF20.00-N-1001-01D

In the event of fluid loss which is not due to normal consumption

Check cooling system for leaks
(subject to separate repair order).

AP20.00-T-2050CA

4

Adjust coolant to correct level by pouring in coolant up to the maximum marking

Use only coolant of the specified composition.

Notes on coolant

All engines

AH20.00-N-2080-01A

5

Screw down cap (1)

Engine cooling system

Number

Designation

Engine
457.941

Engine 402.970, 441.980, 446.938, 457.944

BF20.00-N-1001-01D

Coolant capacity

without VOITH retarder

Liters

-

75...100

with VOITH retarder

Liters

90...105

95...120

Specifications for Operating Fluids

Sheet

BB00.40-P-0310-01A

BB00.40-P-0310-01A

Sheet

BB00.40-P-0325-02A

BB00.40-P-0325-02A

Commercially available tools

Number

Designation

WH58.30-Z-1001-25A

Antifreeze tester

Referenced documents