ap0020d1100a

Perform delivery and hand-over inspection

Type ap · topic 00.20 · version 1302 · 2020-07-15

Applies to: Model 415, 447, 448, 470, 471, 900, 906, 907, 909, 910

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.20 Maintenance, service system (FSS, ASSYST) — Series 415 · Series 447 · Series 448 · Series 470 · Series 471 · Series 900 · Series 906 · Series 907 · Series 909 · Series 910

EinPAS 10 Service › 10.10 Customer service › 10.10.31 Inspection/check — Series 415 · Series 447 · Series 448 · Series 470 · Series 471 · Series 900 · Series 906 · Series 907 · Series 909 · Series 910

EinPAS 45 Data/information › 45.10 Overall vehicle › 45.10.20 Overall vehicle — Series 415 · Series 447 · Series 448 · Series 470 · Series 471 · Series 900 · Series 906 · Series 907 · Series 909 · Series 910

AP00.20-D-1100A

Perform delivery and hand-over inspection

09.07.2020

Model

415, 447, 448, 470, 471, 900, 906, 907, 909, 910

Perform delivery and hand-over inspection

Delivery inspection

Additional operations for vehicles with a non-operational time of more than 6 months - subject to separate repair order

Additional operations for vehicles with a non-operational time of more than 12 months - subject to separate repair order

G00.20-3142-11

Customer

Order number

VIN/license plate number

Current mileage

Completion time/date

Notes/explanations

The following activities are hereby confirmed:
- Completion of relevant service operations

Signature

D

Z6

Z12

Input condition not OK:

Completed

General

Check vehicle for any unresolved service measures.

To be performed by the service advisor.

If there are any unresolved service measures,

conduct unresolved service measures.

After obtaining special order.

Read out radio code from VeDoc.

Model 415

OF82.60-N-3000-04CV

Enter radio code into form and hand over to Sales or the customer.
To be performed by the service advisor.

Product instructions: Print out form.

OF00.00-D-3000-11A

Print the form and place into the vehicle, or hand over to Sales.
To be performed by the service advisor.

Confirm verification of delivery inspection in maintenance booklet or DSB (Digital Service Booklet).

Completely fill out and confirm verification in maintenance booklet or DSB. If this is not completed, the inspection is considered not to have been carried out and may lead to rejection of warranty claims depending on the nature of the damage.
To be performed by the service advisor.

Visual, status and function checks (vehicle cleaned)

Engine: Check/correct oil level.

If the oil level is not correct,

Correct oil level.

After obtaining special order.

Engine cooling system: Check/correct fluid level.

If fluid level is not correct,

Correct coolant level.

After obtaining special order.

Windshield washer system: Check/correct fluid level.

If fluid level is not correct,

Correct fluid level of windshield washer system.

After obtaining special order.

Remove towing eye and install cover.

Model 447, 448

Secure towing eye on vehicle tool kit using existing tensioning strap, so that squeaking or clattering noise doe snot occur.

Remove transport foil, protective foil and transport labels.

Vehicle interior, equipment, trim, seats

Remove protective foils from vehicle interior.

Read out map data release from navigation system, check update, and then update and enter data into table.

Current data release: _____________

If the map data status is not up-to-date,

update map data.

All except model 447 except code EA2 (COMAND Online with 6-disk DVD changer) except code EJ9 (COMAND Online) model 470 except code EJ9 (COMAND Online)

With code EA2 (COMAND Online with 6-disk DVD changer) or with code EJ9 (COMAND Online)

AP82.85-S-8252E

After obtaining special order.

update map data.

Model 447, 470
with code EJ9 (COMAND Online)
except code EX9 (3 years' free map updates)
Model 447
with code EA2 (COMAND Online with 6-disc DVD changer)
except code EX9 (3 years' free map updates)

Service Information: Update map data version for COMAND navigation system as part of delivery and handover inspection

SI82.85-S-0048A

AP82.85-S-8252E

Confirm vehicle handover in instrument cluster.

Model 447.6/7
Vehicle without steering wheel buttons

AP00.20-S-0041-01EA

Model 447.6/7
Vehicle with steering wheel buttons

AP00.20-S-0041-01EB

Model 447.8

AP00.20-S-0041-01E

Model 470.252/270, 471.252

AP00.20-S-0041-01P

Model 900, 906
with code CL4 (Multifunction steering wheel with trip computer)

AP00.20-D-0041-01H

Model 900, 906
except code CL4 (Multifunction steering wheel with trip computer)
Model 909

AP00.20-D-0041-01HA

Model 907, 910
except code C6L (Multifunction steering wheel)

AP00.20-D-0041-01TSC

Model 907, 910
with code C6L (Multifunction steering wheel)

AP00.20-D-0041-01TS

Check time setting of clock, adjust if necessary.

Check horn for proper operation.

Check warning and function indicator lamps in instrument cluster.

Install electrical fuse (15 A).

Model 415
with code E1M (Navigation system, including radio)
Model 415
with code J67 (Anti-theft alarm system)

SI54.15-S-0007A

Deactivate transport mode.

Model 415

AR54.00-S-0001CV

Model 470, 471

AR54.00-S-0001P

Model 447 with code XM0 (Facelift), model 907, 910

AR54.00-D-0001TS

Check status of high-voltage battery on additional instrument display.

Model 447 with engine 780.7, model 910 with engine 780.703


Do not disconnect 12 V battery ground line.
Otherwise, the high-voltage battery is not balanced, and this can lead to damage to the high-voltage battery.

Enter state of charge of high-voltage battery here: __________________

If the charge level of the high-voltage battery drops below 50 % or if the display shows ,

Fully charge high-voltage battery.

Wheels, tires

Check for tight fit.

AP40.10-D-4070-01A

Retighten all wheel bolts/nuts with the prescribed tightening torque. Do not undo wheel bolts/nuts.
Check that spare tire is firmly seated.

Check tire pressure, correct if necessary and enter measurement values in table.

Model 415

AP40.15-S-4060A

Model 447, 448

AP40.15-S-4060E

Model 470, 471

AP40.15-S-4060P

Model 900, 906

AP40.15-D-4060-01E

Model 909

AP40.15-D-4060-01F

Model 907, 910

AP40.15-D-4060TS

Correct tire pressure as per the air pressure table.

Attach hub caps.

Vehicles with steel rims

Additional operations: Transport lock

Remove battery disconnect switch from seat console.

Model 447 with code ED6 (Taximeter in inside rear-view mirror), or with code Z65 (Marine transport, prepare)

AR54.10-S-0039E

Remove subject to separate repair order.

Additional operations: Camper van equipment

Check pop-up roof and equipment for damage and function, charge batteries.

Model 447.7 with code ZH6 (Marco Polo ACTIVITY); Model 447.8 with code Z93 (Marco Polo HORIZON); Model 447.8 with code ZK7 (Marco Polo equipment line)

AP00.20-S-4000E

Install electrical fuse of kitchen module auxiliary battery supply (F60/6) (50 A).

Model 447.813 13 as of 327562
with code ZK7 (Equipment line MARCO POLO)as of equipment number 288040G04498

Service Information: Electrical fuses

SI54.15-S-0007B

The fuse box is located underneath the driver's seat, the electrical fuse in the glove compartment housing.

Miscellaneous

Enter any other faults into table.

Additional operations for non-operational time of more than 6  months - subject to separate repair order

Check brake disks for corrosion.

If a vehicle is not driven for an extended period of time, a thin layer of rust may form on the friction surfaces of the brake disks. This layer of rust has no effect on the working life of the brake disk and is usually removed when the brakes are applied.

If brake disks are corroded,

Perform a test drive and heat up brakes.

Renew brake fluid.

Model 415

AP42.50-S-4280CV

Model 447, 448

AP42.50-S-4280E

Model 470, 471

AP42.50-S-4280P

Model 900, 906

AP42.50-D-4280A

Model 909

AP42.50-D-4280R

Model 907, 910

AP42.00-D-4280TS

Additional operations for non-operational time of more than 12 months - subject to separate repair order

Engine: Change oil and oil filter.

Model 415 with engine 200

AP18.00-S-0101CVA

Model 415 with engine 607

AP18.00-S-0101CV

Model 415 with engine 608

AP18.00-S-0101CVC

Model 447, 448 with engine 274

AP18.00-S-0101EA

Model 447 with engine 622

AP18.00-S-0101EF

Model 447 with engine 651

AP18.00-S-0101E

Model 447 with engine 654

AP18.00-S-0101EG

Model 470, 471 with engine 699.3

AP18.00-S-0101P

Model 470, 471 with engine 642.8

AP18.00-S-0101PS

Model 900 with engine 651
Model 906 with engine 642, 646, 651

AP18.00-D-0101H

Model 909 with engine 646

AP18.00-D-0101R

Model 907 with engine 642.8
Model 907, 910 with engine 651.9

AP18.00-D-0101TS

Model 907 with engine 274.9

AP18.00-D-0101TSC

Model 907.1/2/6 with engine 654.9

AP18.00-D-0101TSD

Replace AdBlue®.

Model 415 with engine 608

AR49.20-S-2015CE

Model 447 with engine 622, 651

AR14.40-S-2014-02E

Model 447 with engine 654.9

AR49.20-S-2015EA

Model 470 with engine 642, 699

AR14.40-S-0012-01PD

Model 906 with engine 642, 651

AR14.40-D-2014-02A

Model 907 with engine 642
Model 907, 910 with engine 651
Model 907.1/2/6 with engine 654.9

AR49.20-D-2014-01TS

Check brake disks for corrosion.

If a vehicle is not driven for an extended period of time, a thin layer of rust may form on the friction surfaces of the brake disks. This layer of rust has no effect on the working life of the brake disk and is usually removed when the brakes are applied.

If brake disks are corroded,

Perform a test drive and heat up brakes.

Renew brake fluid.

Model 415

AP42.50-S-4280CV

Model 447, 448

AP42.50-S-4280E

Model 470, 471

AP42.50-S-4280P

Model 900, 906

AP42.50-D-4280A

Model 909

AP42.50-D-4280R

Model 907, 910

AP42.00-D-4280TS

Chassis, frame, body, front end, structure, platform (decision on scope through MPC) - subject to separate repair order

Check condition.

Ignore any body shell faults that do not adversely affect the overall appearance.

Check paint zone 1 (immediate field of vision).

This zone must have a proper and clean paintwork surface. Ignore small individual dust or dirt particle inclusions that are more than 30 cm apart and which do not affect the overall appearance.

Check paint zone 2 (not immediate field of vision).

Ignore any small paintwork faults, slightly uneven areas and small individual runs without drip formation.

Check for paint damage.

May not occur in any visible areas.

Check for any paint runs.

Individual paint runs in the load compartment textured paint are permitted.
The run structure (orange peel) is not a quality problem.

Check for corrosion.

There must be no outer visible signs of corrosion on folds and overlaps on the entire body and frame.
Pay greater attention to street dust and industrial fallout (rust film particles).

If the paint surface exhibits corresponding features,

Clean paint surface using suitable care products.

After obtaining special order.

Map data

Map data release version


Vehicle input


Vehicle output


Set tire pressure in bar or psi

Front axle

Rear axle

Spare wheel

bar/psi


Miscellaneous

1)

2)

3)

Referenced documents