AR83.70-W-5807J | Remove and install combustion and heater air blower | 28.6.06 |
MODEL 375.1 with BODY 375.830 with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater
MODEL 375.3 with BODY 375.810 with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater
MODEL 375.4 with BODY 375.840 with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater
MODEL 944 with BODY 944.899 with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater
MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater
MODEL 375.1 with BODY 375.850 with CODE (HZ3) Warm air auxiliary heater, 2000W
MODEL 375.3 with BODY 375.820 with CODE (HZ3) Warm air auxiliary heater, 2000W
MODEL 375.4 with BODY 375.860 with CODE (HZ3) Warm air auxiliary heater, 2000W
MODEL 940, 942, 943, 944 with BODY 944.890 with CODE (HZ3) Warm air auxiliary heater, 2000W
MODEL 950, 952, 953, 954 with BODY 940.890 with CODE (HZ3) Warm air auxiliary heater, 2000W
MODEL 970, 972, 974, 975, 976 with BODY 972.890 with CODE (HZ3) Warm air auxiliary heater, 2000W
MODEL NAB374.602 /651 /655 /682 /685 with BODY 374.870 with CODE (HZ3) Warm air auxiliary heater, 2000W
W83.70-1310-06
2 Bolts
3 Combustion and heater air blower
4 Seal
5 Heat exchanger
A, B, C, D Tightening sequence
| Remove/install | ||
Danger! | Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
1 | Remove heater unit | Vehicles with CODE (H13) "Eberspächer" D2 S warm air auxiliary heater | |
Vehicles with CODE (HZ3) Warm air auxiliary heater, 2000W and with CODE (F07) Cab S (short) | |||
Vehicles with CODE (HZ3) Warm air auxiliary heater, 2000W and with CODE (F04) Cab L (long) | |||
2 | Remove housing shells | ||
3 | Remove control unit from heater | ||
4 | Remove bolts (2), remove combustion and hot air blower (3) from heat exchanger (5) | Installation: Replace seal (4). Tighten the bolts (2) in the prescribed tightening order (A, B, C, D). | |
| |||
5 | Install in the reverse order | ||
6 | Check function of heater | See heater unit operating instructions. |
Stationary heater unit
Number | Designation | Model | Model | Model | ||
BA83.70-N-1003-03F | Screw, combustion and hot air blower to | Nm | 4 | 4 | 4 | |
Stationary heater unit
Number | Designation | Model | Model | Model | ||
BA83.70-N-1003-03F | Screw, combustion and hot air blower to | Nm | 4 | 4 | 4 | |
Stationary heater unit
Number | Designation | Model | Models | Models | ||
BA83.70-N-1003-03F | Screw, combustion and hot air blower to | Nm | 4 | 4 | 4 | |
Stationary heater unit
Number | Designation | Model | Model | Model | ||
BA83.70-N-1003-03F | Screw, combustion and hot air blower to | Nm | 4 | 4 | 4 | |
Stationary heater unit
Henviste dokumenter
- ar8370w5302j
- ar8370w5302k
- ar8370w5302l
- ar8370w5808j
- ar8370w5930j
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as8370z000201a Fare for eksplosion på grund af brændstofdampe, fare for forgiftning ved indånding af forbrændingsgas og fare for personskade på grund af forbrændinger, under eller efter at varmesystemet har været i drift.