ar4020t0345c

Measuring and adjusting wheel lock

Type ar · emne 40.20 · version 0104 · 2005-09-02

Gælder for: MODEL NMB613.364 /365 /367 /368 with VOSE front axle for O560

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.20 Undervognsudmåling — Serie 613 (modeller 364, 365, 367, 368)

EinPAS 20 Undervogn › 20.10 Undervognsudmåling › 20.10.20 diagnose/kontrol/udmåling/indstilling — Serie 613 (modeller 364, 365, 367, 368)

AR40.20-T-0345C

Measuring and adjusting wheel lock

10.2.00

MODEL NMB613.364 /365 /367 /368
with VOSE front axle for O560

Measuring and adjusting wheel lock

T40.20-0007-01

Modification notes

6.7.05

Adjustment value BE40.20-N-1002-11B added

Step 6

Danger!

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0009-01A

1

Drive vehicle to alignment check bay

The chassis alignment must be performed on a horizontal, level and clean underground.

An alignment check bay with a workshop pit is a substantial advantage.

2

Check prerequisites for chassis alignment

Check preconditions for chassis alignment on front axle only.

AR40.20-T-0050A

3

Position vehicle on turnplates

AR00.60-T-2000-01C

4

Place front wheels in straight-ahead position

If the front wheels are in the straight-ahead position, set scale on turnplates to "0".

5

Turn steering wheel all the way to the left and determine the value for the wheel angle on the left wheel

If the measured value does not lie in the tolerance range of the given value then the steering lock must be adjusted:

*BE40.20-N-1001-11B

Adjusting wheel lock

AR40.20-T-0345-01C

6

Turn steering wheel all the way to the right and determine the value for the wheel angle on the right wheel

If the measured value does not lie in the tolerance range of the given value then the steering lock must be adjusted:

*BE40.20-N-1002-11B

Adjusting wheel lock

AR40.20-T-0345-01C

7

Check pressure reduction valves, adjust if necessary

Only perform:

if the steering assist is insufficient.

if the wheel stop bolt on the front axle had to be removed.

Model 613.364/365/367/368 except ZF 8098 steering for O560

Model 613.364/365 with ZF 8098 steering for O560

AR46.25-T-3090C

Model 613.367/368 with ZF 8098 steering for O560

AR46.25-T-3090CA

8

Secure turnplates by moving the lever and lower the vehicle

Test values for front wheel alignment

Number

Designation

Model
613.364/365/
367/368 with VOSE front axle

BE40.20-N-1001-11B

Left wheel angle

Tires

Left

°

56° (-3°)

295/80R 22.5

Right

°

41° (-3°)

Tires

Left

°

56° (-3°)

275/70R 22.5

Right

°

41° (-3°)

Tires

Left

°

56° (-3°)

11 R 22.5

Right

°

41° (-3°)

BE40.20-N-1002-11B

Right wheel angle:

Tires

Left

°

56 (-3)

295/80R 22.5

Right

°

41° (-3°)

Tires

Left

°

56° (-3°)

275/70R 22.5

Right

°

41° (-3°)

Tires

Left

°

56° (-3°)

11 R 22.5

Right

°

41° (-3°)

Henviste dokumenter