Test and adjustment values for differential gear
Number | Designation | Rear axle 741.4 | Rear axle | Rear axle | ||
BE35.30-N-1002-03A | Friction torque of differential | Nm | 20...40 | 20...40 | 20...40 | |
Rear axle drive
Number | Designation | Rear axle | Rear axle | |||
BA35.30-N-1003-02A | Bolt of cover to split differential housing | M8 | 10.9 | Nm | 45 | 45 |
M10 | 10.9 | Nm | 60 | 60 | ||
Rear axle drive
Number | Designation | Rear axle | |||
BA35.30-N-1003-02A | Bolt of cover to split differential housing | M8 | 10.9 | Nm | 45 |
M10 | 10.9 | Nm | 60 | ||
460 589 11 15 00
Drift
Repair materials
Number | Designation | Order number |
BR00.45-Z-1028-06A | Molykote paste HTP special lubricating grease | - |
BR00.45-Z-1029-06A | WHS LN 776 special lubricating paste | - |
D35.30-0016-01
D35.30-0015-01
Grease all moving parts of the differential with special lubricant before installing.
1 Install rear axle side gear (4) with shim (3) in differential housing.
2 Fit differential pinions (6) and spherical washers (5) on differential spider (7).
D35.30-0018-01
D35.30-0017-01
3 Install differential spider (7) with differential pinions (6) and spherical washers (5) in differential housing.
4 Fit upper rear axle side gear (4) with shim (3).
D35.30-0025-01
D35.30-0019-01
5 Fit cover (14) on differential housing.
The markings must match (same numbers opposite each other, arrow).
6 Tighten retaining bolts (13) for cover (14) on differential housing .
D35.30-0021-01
7 Insert drift (1) into rear axle side gear (4).
8 Fit torque wrench over drift (1).
9 Check friction torque (total friction moment) of differential and compare with specified value.
The total friction moment can be changed by adjusting the thickness of the shims. The shims are available in thicknesses from 1.30 mm to 1.85 mm in graduations of
0.05 mm.
10 Exchange shims if necessary and remeasure total friction moment.