Represented on vehicle 368 |
1 | Cooling system reservoir cover |
B20.00-0035-11
2 | Draining plug (radiator) |
3 | Draining plug (engine block) |
N20.00-0298-01
B20.00-0034-01
Represented Voith retarder R123 |
4 | Draining cylinder (retarder) |
B20.00-0036-11
Represented in automatic gearbox 723.4 |
5 | Cooling hose (retarder) |
B20.00-0051-01
Drain | |||
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Notes on coolant | ||
1 | Open the expansion tank's (1) cap | If the vehicle is equipped with heating, actuate the command to the open position. | |
2 | Detach draining cylinder (3) from engine block | Connect the draining cylinder draining hose (3), open and collect the cooling liquid in an appropriate container. | |
3 | Remove the radiator draining cylinder (2) | Collect the coolant in an appropriate recipient. | |
4 | Remove the retarder draining cylinder (4) | Only for vehicles equipped with brake retarder | |
Collect the coolant in an appropriate recipient. | |||
5 | Remove the clamp (5) and detach retarder cooling hose, in both sides | Only for vehicles equipped with automatic transmission. | |
Collect the coolant in an appropriate recipient. | |||
6 | Remove grease and residues from cooling system |
| |
Recommended procedure, when the cooling system presents high content of residues or oil contamination. | |||
Refill | |||
7 | Install draining cylinder (2) of the radiator cooling liquid | Replace the sealing ring. | |
.Coolant draining plug in the radiator | |||
8 | Tighten draining cylinder (3) of the engine block cooling liquid | .Engine block coolant drain plug | |
9 | Install draining cylinder (4) of the retarder cooling liquid | .Drain plug | |
10 | Supply with coolant | Supply the cooling system until reaching the expansion tank's maximum level reference mark. | |
Pay attention to the concentration of the anti-corrosion/antifreeze product. | |||
.Cooling system - Approximate level | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
11 | Let the engine operate for 1 or 2 minutes | Allow the engine to operate in varied rpm ranges. | |
If necessary, replenish the coolant. | |||
12 | Check the tightness of the cooling system | Inspect cooling system for leaks | |
13 | Install the supply mouth cap in the expansion tank |
Engine cooling system capacity |
Number | Designation | Engine 904.945/962/973, 924.981 in Type 368, 382, 685.28 | Engine 906.933/974/975/977/988/999 in Type 368, 382 | |||
BF20.00-B-1001-01F | Cooling system - Approximate level | Vehicles without retarder | Litros | 28 | 37 | |
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | 50 | ||
Anti-corrosion CLASS MB 312.0 | % | 10 | 10 | |||
Product already diluted | Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3 | Litros | 28 | 37 | ||
Vehicles with retarder | Litros | 34 | 43,5 (VR 120) ou 43,0 (VR123) | |||
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | 50 | ||
Anti-corrosion CLASS MB 312.0 | % | 10 | 10 |
Engine cooling system capacity |
Number | Designation | Engine 924.913/925 in Type 368 | Engine 926.950 in model 368 | |||
BF20.00-B-1001-01F | Cooling system - Approximate level | Vehicles without retarder | Litros | 28 | 47 | |
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | 50 | ||
Anti-corrosion CLASS MB 312.0 | % | 10 | 10 | |||
Product already diluted | Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3 | Litros | 28 | 47 | ||
Vehicles with retarder | Litros | 34 | - | |||
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | - | ||
Anti-corrosion CLASS MB 312.0 | % | 34 | - |
Engine cooling system capacity |
Number | Designation | Engine 906.983/994 in Type 382 | |||
BF20.00-B-1001-01F | Cooling system - Approximate level | Vehicles without retarder | Litros | 37 | |
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | ||
Anti-corrosion CLASS MB 312.0 | % | 10 | |||
Product already diluted | Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3 | Litros | 37 | ||
Vehicles with retarder | Litros | - | |||
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | - | ||
Anti-corrosion CLASS MB 312.0 | % | - |
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ar2000b1010xa
- ar2000b1030xa
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske