AR14.40-W-2013B | Remove/install fill level and SCR AdBlue temperature combination sensor | 23.11.10 |
ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944, 958.4 with CODE (MS4) BlueTec 4
ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944, 958.4 with CODE (MS5) BlueTec 5
W14.40-1187-06
1 Electrical line
2 Electrical connector
3 Temperature sensor
4 O-ring
5 AdBlue tank
B117 Fill level and SCR AdBlue temperature combination sensor
| Remove/install | ||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Only pour AdBlue suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
| Notes on use, material properties and handling of AdBlue® | ||
1 | Switch off ignition | ||
2 | Disconnect electrical connector (2) | ||
3 | Pull electrical line (1) out of frame | Installation: Replace removed cable tie. | |
4 | Remove fill level and SCR AdBlue temperature combination sensor (B117) at AdBlue tank (5) | If AdBlue drips escape from AdBlue tank (5) crystals of urea which form can be removed using water and a cleaning cloth. | |
5 | Install in the reverse order |
Henviste dokumenter
- ah1440n000101a Oplysninger om anvendelse og håndtering af AdBlue samt dets stofegenskaber
- as1440z000101a Fare for forbrænding og skoldning ved arbejde på AdBlue-rør og dermed forbundne komponenter. Fare for personskade på hud og øjne ved håndtering af AdBlue. Fare for forgiftning ved indtagelse af AdBlue