ar0910p1150rt

Remove/install air filter housing

Type ar · emne 09.10 · version 0100 · 2005-07-14

Gælder for: ENGINE 113.971 in MODEL 251.075 /175

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.10 Luftfilter — Serie 251 (modeller 075, 175)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.40 luftfilter/luftfilterkasse — Serie 251 (modeller 075, 175)

Gælder også for motorer/gearkasser: 113 971

AR09.10-P-1150RT

Remove/install air filter housing

6.6.05

ENGINE 113.971 in MODEL 251.075 /175

Remove/install air filter housing

P09.10-2165-04

1 Partition wall

2 Air filter housing

3 Intake air duct

4 Engine cover

5 Supports

6 Supports

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000RT

2

Remove engine trim panel (4)

AR01.10-P-2405RT

3

Remove the left and the right intake air duct (3)

4

Remove partition (1)

AR62.30-P-2400RT

5

Detach the air filter housing (2) from the mounts (5, 6) at the left and right cylinder head cover from above

In order to avoid scratches and damage, the air filter housing (2) must be put down on a padded base.

6

Install in the reverse order

Henviste dokumenter