P01.10-2595-06
Large engine cover
1 Engine cover
2 Guides
3 Pin
P01.10-3019-06
Small engine cover
1 Engine cover
2 Guides
3 Pin
Modification notes
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open engine hood and raise to vertical position | Installation: After closing the engine hood check the locking function by pulling the engine hood jerkily to the top. | |
2 | Switch off ignition | ||
3 | Remove partition wall between wheel wells | Only vehicles with large engine cover | |
4 | Detach engine cover (1) upwards (arrows) from bolt (3) and remove | Installation: Cover guides (2) with lubricant. | |
Antifriction agent | |||
5 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1010-06A | Lubricant, rubber assembly 1 l | A 000 989 03 67 |
Henviste dokumenter
- ar6230p2400rt
- ar8840p1000rt
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.