ar6230p2400rt

Remove/install partition wall between wheelhouses

Type ar · emne 62.30 · version 0100 · 2005-06-21

Gælder for: MODEL 251

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 62 Front og torpedo › 62.30 Tværdragere og afstivning fortil — Serie 251

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.30 Front › 35.30.40 Torpedo — Serie 251

AR62.30-P-2400RT

Remove/install partition wall between wheelhouses

12.5.05

MODEL 251

Remove/install partition wall between wheelhouses

P62.30-2891-05

Shown on vehicle with engine 113.971

1 Engine compartment sealing

2 Bolts

3 Bolts

4 Bolt

5 Partition wall between wheelhouses

Remove/install partition wall between wheelhouses

P62.30-2890-11

2 Bolts

3 Bolts

4 Bolt

5 Partition wall between wheelhouses

Remove/install

1

Open engine hood and raise to vertical position

AR88.40-P-1000RT

2

Remove engine compartment sealing (1) from partition wall between wheelhouses (5)

Installation: Ensure that engine compartment sealing (1) is seated correctly on partition wall.

3

Unscrew screws (2 and 3)

*BA62.30-P-1007-01E

4

Unscrew bolt (4)

5

Pull out partition wall toward front between wheelhouses (5) and remove

Installation: Arrest partition wall between wheelhouses (5) into the three clips on the partition wall (arrows).

6

Install in the reverse order

Crossmember and front reinforcement

Number

Designation

Model
251

BA62.30-P-1007-01E

Bolt, for partition wall between wheelhouses on wheelhouses

Nm

23

Henviste dokumenter