P88.40-2565-09
1 | Lever | 3 | Handle | |
2 | Engine hood | 4 | Release knob |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Open engine hood | |||
1 | Pull lever (1) in left side of footwell to unlock engine hood (2) | Engine hood will pop up; lift hood slightly if necessary. | |
2 | Raise handle (3) and open the engine hood | Wiper arms must not have been folded to the front. | |
Move to upright position | |||
3 | Press red release button (4) on the pneumatic spring and move the engine hood to the vertical position | ||
Close engine hood | |||
4 | Press red release button (4) on the pneumatic spring and close engine hood (2) | Place your hands only on the front edges of the hood. | |
5 | Pull engine hood firmly upwards to check the latching function of the engine hood lock |
Henviste dokumenter
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)