ar0110p2405rt

Remove/install engine cover

Type ar · emne 01.10 · version 0100 · 2005-07-12

Gælder for: ENGINE 113.971 in MODEL 251.075 /175

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.10 Motor komplet — Serie 251 (modeller 075, 175)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.45 afdækning/beklædning — Serie 251 (modeller 075, 175)

Gælder også for motorer/gearkasser: 113 971

AR01.10-P-2405RT

Remove/install engine cover

6.6.05

ENGINE 113.971 in MODEL 251.075 /175

Remove/install engine cover

P01.10-2721-07

1 Mounting clamp

2 Mounting clamps

3 Mounting clamps

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000RT

2

Remove the partition wall between the wheelhouses

AR62.30-P-2400RT

3

Unclip the mounting clamps (1,2), to do this raise the engine cover slightly (arrows A)

When unclipping the engine cover, only lift gently in the area of the mounting clamps, otherwise the cover may break.

4

Unclip the mounting clamps (3), to do this, pull the engine cover slightly forwards

5

Remove engine cover

6

Install in the reverse order

Henviste dokumenter