ar4610p0100t

Remove/install steering wheel

Typ ar · téma 46.10 · verze 0500 · 2006-05-29

Platí pro: MODEL 211.0/ 2/ 6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.10 Volant, sloupek řízení, hřídel sloupku řízení, zámek řízení — Řada 211 (modely 0**, 2**, 6**)

EinPAS 22 Řízení › 22.15 Servořízení › 22.15.40 Volant/sloupek řízení/krycí trubka/zámek řízení — Řada 211 (modely 0**, 2**, 6**)

AR46.10-P-0100T

Remove/install steering wheel

19.5.06

MODEL 211.0/ 2/ 6

Remove/install steering wheel
Remove/install steering wheel
Remove/install steering wheel

P46.10-2618-01

P46.10-2619-01

P46.10-2620-01

3 Electrical connector

32 Steering wheel

32c Countersunk screw

N135 Steering wheel gear shift signal processing module

A45 Fanfare horns and airbag clock spring contact

Remove/install steering wheel

P46.10-2787-11

4 Vibration damper

4a Bolts

Modification notes

24.4.06

Check whether a vibration damper is installed added

Step 6

Remove/install

1

Move steering wheel (32) to horizontal position

Front wheels in straight ahead position

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

2

Remove airbag unit from steering wheel (32)

AR91.60-P-0660T

Notes on performing repair, body work and welding on vehicles with airbags and ETR units

AH91.00-P-0002-01M

3

Unscrew countersunk screw (32c), steadying steering wheel (32).

Installation: Replace countersunk screw.

*BA46.10-P-1001-02A

4

Detach electrical connector (3) of steering wheel gear shift signal processing module (N135)

Vehicles as of model year 04

5

Remove steering wheel (32), passing the cables from the airbag through the opening

Installation: Align recesses of the serrations (arrows) in the steering wheel with the markings on the steering shaft.

Checking

6

Check whether a vibration damper (4) is installed

When replacing the steering wheel (32)

Steering wheels are only available with vibration dampers. If a steering wheel is installed without a vibration damper, then the vibration damper must be removed form the new steering wheel, undo bolts (4a) to do so.

*BA46.10-P-1005-02A

7

Check fanfare horns and airbag clock spring contact (A45) for damage

The clock spring contact must not be twisted when the steering wheel (32) is detached. If the clock spring contact is twisted:

Vehicles up to model year 04:

Set center position of clock spring contact, if necessary:

AR46.10-P-0200-01I

Replace clock spring contact.

AR46.10-P-0200T

Vehicles as of model year 04:

Replace clock spring contact.

AR46.10-P-0200TA

8

Install in the reverse order

9

Conduct a road test

Tests during the road test:

Turn signal reset

When the steering wheel (32) is offset by more than 1 tooth, satisfactory resetting of the turn signal is no longer guaranteed.

Airbag indicator lamp

The SRS indicator lamp must not light up on full steering lock in both directions.

Steering wheel position (32)

If the steering wheel is crooked, adjust it by max. 1 tooth.

Steering wheel

Number

Designation

Model
211

BA46.10-P-1001-02A

Bolts, steering wheel to steering shaft

Nm

80

BA46.10-P-1005-02A

Bolt, vibration damper to steering wheel

Nm

5

Odkazované dokumenty