ar2020d3865d

Remove, install radiator

Typ ar · téma 20.20 · verze 0105 · 2009-12-09

Platí pro: ENGINE 904.904 /961 in MODEL 670 ENGINE 904.908 /914 /923 /936 /955 /964 in MODEL 668, 670

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 20 Chlazení motoru › 20.20 Chladič, hadice chlazení — Řada 668 · Řada 670 · Řada 904 (modely 904, 908, 914, 923, 936, 955, 961, 964)

EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.31 Chladič motoru — Řada 668 · Řada 670 · Řada 904 (modely 904, 908, 914, 923, 936, 955, 961, 964)

AR20.20-D-3865D

Remove, install radiator

8.12.09

ENGINE 904.904 /961 in MODEL 670

ENGINE 904.908 /914 /923 /936 /955 /964 in MODEL 668, 670

Remove, install radiator

D20.20-0053-06

1 Charge air cooler

2 Radiator

3 Air cleaner housing

4 Coolant hose (coolant pump)

5 Crankcase ventilation hose

6 Air intake hose

7 Charge air hose

8 Charge air hose (red)

9 Coolant hose (connection piece)

10 Coolant hose (coolant pump)

11 Coolant hose (distributor)

12 Plug connection of air cleaner monitoring sensor

13 Front end center section

14 Bolts

15 Nuts

Removing, installing

Danger!

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

Notes on coolant

All engines

AH20.00-N-2080-01A

1

Drain coolant completely

Collect coolant

AP20.00-D-2080A

2

Remove front grill

AR88.00-D-2115A

3

Remove trim below front grille

AR88.00-D-2200A

4

Remove front bumper

5

Detach connections at air cleaner housing (3)

AR09.10-D-1150-01D

6

Slacken hose clamps of charge air hoses
(7, 8) at charge air cooler (1)

Inspect condition of hose clamps, replace if necessary.

7

Detach connections at radiator (2)

AR20.20-D-3865-03D

8

Remove hood lock in front end center section (13)

Pull cable for hood out of front end center section.

9

Take out radiator (2) together with charge air cooler (1)

AR20.20-D-3865-04D

10

Detach radiator unit at front end center section (13)

AR20.20-D-3865-05D

11

Install in the reverse order

12

Inspect coolant level and adjust to correct level

AP20.00-D-2080A

13

Inspect cooling system for leaks

AP20.00-D-2050A

Odkazované dokumenty