D20.20-0059-12
1 Remove retaining clamps (7, 8).
Inspect condition of retaining clamps (7, 8), replace if necessary.
2 Pull retaining pins (3) out of front end center section (2), take off rubber bases (4) and rubber intermediate layers (5).
Inspect condition of rubber bases (4) and rubber intermediate layers (5), replace if necessary.
3 Pull radiator unit (1) up and out of retaining pins in front end center section (2) and take off ruber bases (6).
Inspect condition of rubber bases (6), replace if necessary.
Installation: Position radiator unit (1) together with rubber bases (6) in the retaining pins in the front end center section (2) and insert.
4 Install in reverse sequence.