ar0330p1600w

Remove/install belt pulley/vibration damper

Typ ar · téma 03.30 · verze 0102 · 2016-05-19

Platí pro: Engine 152.9, 276 in model 172.4

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.30 Setrvačník, unašeč, tlumič kmitů, ozubený věnec startéru — Řada 172 (modely 4**)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 172 (modely 4**)

EinPAS 15 Motor › 15.18 Řemenový pohon › 15.18.30 Řemen/řemenice/napínací ústrojí/vratná kladka — Řada 172 (modely 4**)

Platí také pro motory/převodovky: 152 9**, 276 ***

AR03.30-P-1600W

Remove/install belt pulley/vibration damper

21.04.2016

Engine

152.9, 276 in model 172.4

Remove/install belt pulley/vibration damper

Shown on ENGINE 276.9

3

Center bolt

4

Key

5

Radial shaft sealing ring

8

Belt pulley/vibration damper

P03.30-2158-06

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove front engine cover

Engine 276.9 in model 172.4

2

Remove engine air intake ducts upstream of air filter

Engine 276.9 in model 172.4

3

Remove fan unit

Engine 152.9 in model 172.4

AR20.40-P-5050MMI

4

Detach left charge air pipe from left ATL

Engine 276.8 in model 172

AR09.41-P-1311RKA

5

Detach right charge air pipe from right ATL

Engine 276.8 in model 172

AR09.41-P-1311RKA

6

Detach charge air cooler and place to one side with attached coolant hoses

Engine 276.8 in model 172

AR09.41-P-6819RKA

7

Remove poly-V belt


Engine 276 in model 172

AR13.22-P-1202W

Engine 152.9 in model 172

AR13.20-P-0001MMI

8

Rotate engine at center bolt (3) to TDC (top dead center)

9

Install retaining lock for crankshaft/starter ring gear


Engine 152.9 in model 172

AR03.30-P-5000MMI

Engine 276 in model 172

AR03.30-P-5000W

10

Remove center bolt (3)

Installation: Install new center bolt (3).

Center bolt, belt pulley to crankshaft

*BA03.30-P-1001-01M

11

Detach belt pulley/vibration damper (8) from crankshaft

Installation: Through turning motions ensure that the key (4) of the crankshaft engages in the groove on the belt pulley/vibration damper (8).

Check

12

Check contact surface of the radial shaft sealing ring (5) on hub of the belt pulley/vibration damper (8) for scoring and galling

For scoring and galling

Replace belt pulley/vibration damper (8).

13

Check front radial shaft sealing ring (5) for damage

If damage is present

Replace front radial shaft sealing ring (5).


AR03.20-P-3000W

14

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

15

Perform an engine test run and check engine for leaktightness

Flywheel, drive plate, vibration damper, starter ring gear

Number

Designation

Engine 152

Engine 276

BA03.30-P-1001-01M

Center bolt, belt pulley to crankshaft

Stage 1

Nm

200

200

Stage 2

°

180

180

Odkazované dokumenty