|
AXOR | Telligent ® maintenance V2 Adjust valve clearance at the 1st, 3rd, 5th, 7th, etc. general maintenance J1 Work relevant to safety once a year J1 Maintenance jobs once a year J2 Maintenance work every 2 years J3 Maintenance work every 3 years |
Customer: ________________________ Order number: _____________________ License number: ___________ Confirm that work has been completed by signing Fitter: _________________ Date: __________________ |
Performed | Input condition NOT OKAY | Operation Position no.. | |
Check by Customer service adviser | |||
| Check vehicle for damaged paintwork, corrosion or damage caused by an accident | | |
| Date of tachograph inspection | | |
| Tilt cab: | ||
Telligent ® servicing | Work to be performed, to be ticked off by service advisor | ||
Motor | |||
| Engine oil and filter change | Observe the adjusted oil quality in the maintenance system and change if necessary | |
| Replace coolant | Observe coolant composition! | |
General maintenance job | |||
V2 | Check and adjust valve clearance | | |
| Fuel prefilter with water separator - replace filter element |
| |
| Replace fuel filter |
| |
Air filter | |||
| Air filter with dust discharge valve: |
| |
| Replace air filter element | Replace at least every three years. (pay attention to installation date!) | |
manual transmission | |||
| Oil change | Observe the adjusted oil quality in the maintenance system and change if necessary | |
Rear axles | |||
| Rear axle Oil change | Observe the adjusted oil quality in the maintenance system and change if necessary | |
| Rear axle through-drive housing: |
| |
|
Telligent ® timed service | Input condition NOT OKAY | ||
Oil service | |||
Lubrication work | |||
J1 | Grease gun: |
| |
Maintenance | |||
Function test | |||
J1 | Signaling system, indicator lamps | | |
J1 | Windshield wipers, windshield washer system | | |
Check for leaks and condition | |||
J1 | All major assemblies: | | |
J1 | All lines and hoses, sensor cables | | |
J1 | All vessels, equipment, shock absorbers, covers, boots, protective caps | | |
J1 | Intake pipe between air filter and engine | | |
J1 | Cooling and heating system - status test of radiator, lines and hoses | | |
Check fluid level, correct if necessary | |||
J1 | Check engine cooling system | ______°C Top up against separate order | |
J1 | Batteries | | |
Engine | |||
J1 | Inspect poly V-belt for wear and damage | | |
Chassis and body | |||
J1 | Replace heating/ventilation dust filter |
| |
J1 | Adjust tire inflation pressure to correct pressure, including spare tire | | |
J2 | Compressed-air drier - replacing granulate cartridges |
| |
J2 | Wheel hubs on the front axles: | If not performed in combination with other repairs. | |
|
Carry out operations relevant to safety at least once a year, if no legal inspections are planned within a year | |||
J1 | Read out brake wear in display |
| |
| Brake pad wear in %: Axle A1 Left ______ MW/A 6 Axle A3 Left ______ MW/A 10 Axle A4 Left ______ MW/A 12 |
Axle A1 Right ______ MW/A 7 Axle A3 Right ______ MW/A 11 Axle A4 Right ______ MW/A 13 | |
| MW/A = measured value (Display) | Note: 0 % = when new 100 % = Lining worn | |
J1 | Automatic load-controlled brake: | | |
J1 | Automatic brake adjuster - checking release travel of wheel brake cylinders | DRUM BRAKE | |
J1 | Checking condition of steering mechanism | | |
J1 | Check condition of leaf springs | | |
J1 | Headlights: | | |
Final operations on | |||
| Process service data in display | Confirm work performed (reset intervals); Inspect oil grades and SAE grades, modify as required | |
| Process oil qualities using STAR DIAGNOSIS | Check adjusted oil qualities for axles, change if necessary | |
Final inspection | |||
| Visual inspection/road test/test bench | Ensure vehicle is in proper roadworthy condition: |
Atıfta bulunulan belgeler
- ap0020w0020a Yağlama yerleri
- ap0020w0041a Servis verilerinin ekranda işlenmesi
- ap0020w0050a Agregaların sızdırmazlığının ve durumunun kontrol edilmesi
- ap0020w0051a Tüm hatlar ve hortumlar, sensör kabloları - sızdırmazlık ve durum kontrolü
- ap0020w0052a Tüm depo ve kaplarının, cihazların, amortisörlerin, toz lastiklerinin, koruyucu başlıkların sızdırmazlıklarının ve durumlarının kontrol edilmesi
- ap0530w0560c Supap boşluğunun ayarlanması
- ap0900w0953a Hava filtresi ve motor arasında bulunan emme hortumu - Sızdırmazlığının ve durumunun kontrol edilmesi
- ap0910w0931a Toz atma supaplı hava filtresi Tozun boşaltılması
- ap0910w0980a Hava filtre elemanının yenilenmesi
- ap1322w1351a Kanallı V kayışının aşınmaya ve hasara karşı kontrol edilmesi
- ap1800w0101c Motor yağı ve yağ filtresi değişimi
- ap2000w2010a Motor soğutma sistemi sıvı seviyesinin kontrol edilmesi, ayarlanması. Korozyon/don önleyici maddenin kontrolü, tamamlanması
- ap2000w2050a Soğutma ve kalorifer sistemi - Radyatörün, boruların ve hortumların durumunu kontrol edin
- ap2000w2080a Soğutma maddesini yenileyin
- ap2600w2601a Mekanik şanzıman yağ değişimi
- ap3220w3255a Yay yaprakları/Süspansiyon körükleri Hasarların gözle kontrolü
- ap3320w3350a Ön aks poyraları - Gresin yenilenmesi, konik masuralı rulmanların kontrol edilmesi
- ap3500w3501a Arka aks yağ değişimi
- ap3500w3502a Ön aks tahrikli aks kovanı-yağ değişimi
- ap4015w4060a Lastik hava basıncının stepne dahil düzeltilmesi
- ap4200w4293d Fren balatası aşınmasının ekrandan okunması
- ap4210w4291a Otomatik fren ayarı - Tekerlek fren silindirleri çalışma mesafesi kontrolü
- ap4260w4381a Basınçlı hava kurutucusu - Nem alıcı kartuşların yenilenmesi
- ap4280w4263b Yüke bağlı otomatik fren boşluk ve ayar kontrolü
- ap4600w4650a Direksiyon mekaniği durum kontrolü
- ap4720w0780a Yakıt filtresini yenileyin
- ap4720w0783a Su ayrıştırıcılı yakıt ön filtresi - Filtre elemanının yenilenmesi
- ap5400w5451b Sinyalizasyon ve kontrol lambaları İşlev kontrolü
- ap5410w5410a Aküler - Sıvı seviyesinin kontrolü, tamamlanması
- ap8210w8260a Far ayarının kontrol edilmesi, düzeltilmesi
- ap8230w8252a Cam silecekleri, cam yıkama ve far temizleme tertibatı - Çalışma kontrolü
- ap8300w8381b Kalorifer/Havalandırma toz filtresinin yenilenmesi