AR43.30-T-0015B | Remove/install coolant temperature sensor | 8.6.11 |
MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx
MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx
MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx
MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx
T43.30-0023-01
1 Water temperature sensor (B93/1)
2 Sealing ring A14x20
3 Heat exchanger
| Remove/install | ||
Danger! | Risk of scalding from hot coolant spraying out | Do not open cap of the expansion reservoir or radiator unless coolant temperature is below 90 °C. Turn cap carefully to the first detent or slacken one turn. Wear protective clothing. | |
1 | Switch off ignition | ||
2 | Drain coolant | ||
| Notes on coolant | All engines | |
3 | Detach electrical line from coolant temperature sensor (1) | ||
4 | Remove coolant temperature sensor (1) from lower coolant connection | Installation: Replace sealing ring (2). | |
5 | Install in the reverse order | ||
6 | Pour in coolant | ||
| Notes on coolant | All engines | |
7 | Conduct a road test | Bleed retarder: -If present and possible, switch off retarder foot control. -Drive vehicle at 50 km/h. -Switch on retarder in first brake stage 5 times for approx. 5 seconds each. |
Retarder (hydraulic)