Check condition of tires

AR40.10-D-0001A

14.02.2019

Model

415, 447, 448, 470, 471, 636, 639, 900, 906, 907, 909, 910

P40.10-0001-01

Shoulder wear on tire


	Center wear on tire

P40.10-0002-01

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Information on tires / rims	Transporter außer Minibuse	AH40.10-P-9411-01A
Topical note	Special instructions for lifting and supporting vehicle	Model 470, 471	AH00.60-N-0100-01P
Topical note	Special instructions for lifting and supporting vehicle	Model 907, 910	AH00.60-N-0100-01TS
	Check
1	Raise vehicle.	Model 415	AR00.60-S-1000C
		Model 447, 448	AR00.60-S-1000E
		Model 470, 471	AR00.60-S-1000-04P
		Model 636, 639	AR00.60-S-1000S
		Model 900, 906	AR00.60-D-1000H
		Model 907, 910	AR00.60-D-1000-04TS
		Model 909	AR00.60-D-1000F
2	Check treads as well as outer and inner side walls of all tires for damage such as cuts, punctures, cracks, breakouts, peelings and ingressed foreign objects.	If there is a problem:
		
		Replace damaged tires.
		Model 470, 471	AR40.10-S-1030P
		Model 447, 448	AR40.10-S-1030E
		Model 636, 639, 906	AR40.10-S-1030S
		Model 415	AR40.10-S-1030C
		Model 907, 910	AR40.10-D-1030TS
		Model 909	AR40.10-D-1030FA
3	Evaluate wear pattern of tires on front and rear axle.	 Greater wear at the shoulder compared to the center of the tire is normal for the front wheel-and-tire assemblies. On the tires of the rear wheel-and-tire assemblies the wear at the center of the tread depth is mostly somewhat more pronounced than at the tire shoulders.
		If there is a problem:
		
		Determine cause, rectify it and, if necessary, replace worn tires.
		Model 470, 471	AR40.10-S-1030P
		Model 636, 639, 906	AR40.10-S-1030S
		Model 447, 448	AR40.10-S-1030E
		Model 415	AR40.10-S-1030C
		Model 907, 910	AR40.10-D-1030TS
		Model 909	AR40.10-D-1030FA
4	Evaluate tire tread depth of tires on front and rear axle.	 Assess tire tread depth at point of greatest wear. Assess at outside, inside and center of main tread using treadwear indicators. The height of the treadwear indicators is 1.6 mm (0.06 ").
		 For safety reasons tires should be replaced before reaching the minimum tread depth. Summer tires: At approx. 3 mm (0.12 ") tire tread depth. Winter tires: At approx. 4 mm (0.16 ") tire tread depth.
		If minimum tread depth has been reached:
		
		Replace worn tires.
		Model 470, 471	AR40.10-S-1030P
		Model 636, 639, 906	AR40.10-S-1030S
		Model 447, 448	AR40.10-S-1030E
		Model 415	AR40.10-S-1030C
		Model 907, 910	AR40.10-D-1030TS
		Model 909	AR40.10-D-1030FA
5	Check manufacturing date of tires on front and rear axle.	If manufacturing date is more than 6 years ago:
		
		Replace overaged tires.
		Model 415	AR40.10-S-1030C
		Model 447, 448	AR40.10-S-1030E
		Model 470, 471	AR40.10-S-1030P
		Model 636, 639, 906	AR40.10-S-1030S
		Model 907, 910	AR40.10-D-1030TS
		Model 909	AR40.10-D-1030FA
6	Turn wheel and tire assemblies on front and rear axle.	If necessary.
		Model 415	AR40.10-S-1100C
		Model 447, 448	AR40.10-S-1100E
		Model 470, 471	AR40.10-S-1100P
		Model 636, 639	AR40.10-S-1100S
		Model 900, 906	AR40.10-D-1100H
		Model 907, 910	AR40.10-D-1100TS
		Model 909	AR40.10-D-1100F
		 Maintain running direction of wheel-and-tire assemblies. Otherwise, handling characteristics and handling comfort may be impaired and tire wear increased.
7	Lower vehicle.	Model 415	AR00.60-S-1000C
		Model 447, 448	AR00.60-S-1000E
		Model 470, 471	AR00.60-S-1000-04P
		Model 636, 639	AR00.60-S-1000S
		Model 900, 906	AR00.60-D-1000H
		Model 907, 910	AR00.60-D-1000-04TS
		Model 909	AR00.60-D-1000F

เอกสารที่อ้างถึง