Remove/install wheels

AR40.10-D-1100H

06.03.2020

Model

900, 906

Modification notes

31.08.2018

Document content completely revised

1	Wheel lift
2	Complete wheel

D40.10-A000-03

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Information on tires / rims		AH40.10-P-9411-01A
Topical note	General information on rim / tire conversions	Model 906	AH40.10-P-1050-01A
Topical note	Notes on lug bolts		AH40.10-N-1005-01A
	TIREFIT tire sealant		AH40.10-P-0001-01A
	Remove
1	Raise vehicle.		AR00.60-D-1000H
2	Position a wheel lift dolly (1) to respective wheel and tire assembly (2).	 Commercially available devices/tools Wheel lift
3.1	Unscrew wheel bolts.	Model 900.63 Model 906.11/13/21/61/63/7 Model 906.15/25/65 with code RH9 (Super-single tyres, 285/65 R16 C)
3.2	Unscrew wheel nuts.	Model 900.65 Model 906.15/25/65 except code RH9 (Super-single tyres, 285/65 R16 C)
4	Remove wheel and tire assemblies (2).
	Check
5	Check components of wheel bolt connections for corrosion and damage.		AR40.10-D-1100-02A
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
		Assembly cleaner	*BR00.45-Z-1028-04A
6	Check tires for damage and condition.		AR40.10-D-0001A
		If corresponding findings are present,
		
		Perform suitable repair measures.
7	Check tire pressure.
	Tires - General information		AH40.10-N-1020-01A
	Tire pressure table		AP40.15-D-4060-01E
		If tire pressure wrong.
		
		Correct tire pressure.
	Install
8.1	Position wheel and tire assemblies (2) and screw in wheel bolts.	Model 900.63 Model 906.11/13/21/23/61/63/7 Model 906.15/25/65 with code RH9 (Super-single tyres, 285/65 R16 C)
		 Screw in wheel bolts in a diagonal pattern. Otherwise correct seating of the disk wheel is not guaranteed.
		 The wheel hub must be free of oil or grease.
		 Use a wheel lift dolly (1).
		 Commercially available devices/tools Wheel lift
8.2	Position wheel and tire assemblies (2) and screw on wheel nuts.	Model 900.65 Model 906.15/25/65 except code RH9 (Super-single tyres, 285/65 R16 C)
		 Screw on wheel nuts in a cross pattern. Otherwise correct seating of the disk wheel is not guaranteed.
		 The wheel hub must be free of oil or grease.
		 Use a wheel lift dolly (1).
		 Commercially available devices/tools Wheel lift
9	Lower vehicle.
10.1	Tighten wheel bolts.	Model 900.63 Model 906.11/13/21/23/61/63/7 Model 906.15/25/65 with code RH9 (Super-single tyres, 285/65 R16 C)
		 Tighten wheel bolts in a diagonal pattern. Otherwise correct seating of the disk wheel is not guaranteed.
		 Wheel bolt	*BA40.10-N-1001-01D
10.2	Tighten wheel nuts.	Model 900.65 Model 906.15/25/65 except code RH9 (Super-single tyres, 285/65 R16 C)
		 Tighten wheel nuts in a cross pattern. Otherwise correct seating of the disk wheel is not guaranteed.
		 Wheel nut	*BA40.10-N-1002-01D
11	Set permanent maximum permissible speed in instrument cluster.	Model 906 with code CL4 (Multifunction steering wheel with trip computer)
12	Reinitialize tire pressure sensors using vehicle diagnosis system.	Model 906 with code RY2 (Tyre pressure monitoring system) If one or more tires were replaced or if a wheel and tire assembly rotation was carried out from front to back or from left to right, or if one or more tire pressure sensors were replaced.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-D-2000-04SD

 Wheels

Number	Designation			Model 900.63	MODEL 906.11/13/21/23/61/63/71/73 73TMODEL 906.15/25/65 with CODE RH9
BA40.10-N-1001-01D	Wheel bolt	Steel rim	Nm	240	240
		Aluminum rim	Nm	180	180

 Wheels

Number	Designation		Model 900.65	MODEL 906.15/25/65 except CODE RH9
BA40.10-N-1002-01D	Wheel nut	Nm	180	180

Repair materials

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51
BR00.45-Z-1028-04A	Assembly cleaner	A 000 986 56 01

เอกสารที่อ้างถึง