1 | Wheel lift |
2 | Complete wheel |
D40.10-A000-03
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Information on tires / rims | Model 907, 910 | |
Topical note | General information on rim / tire conversions | ||
Topical note | Notes on lug bolts | ||
General information on malfunctions in the brake system | |||
TIREFIT tire sealant | |||
| Remove | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Remove hub caps. | If installed. | |
3 | Remove wheel and tire assemblies (2). | To do so, unscrew wheel bolts or unscrew wheel nuts. | |
Use a wheel lift dolly (1). | |||
Commercially available devices/tools | |||
| Check | ||
4 | Check components of wheel bolt connections for corrosion and damage. | ||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Assembly cleaner | |||
5 | Check tires for damage and condition. | ||
If corresponding findings are present, | |||
| |||
Perform suitable repair measures. | |||
6 | Check tire pressure. | ||
Tires - General information | |||
| |||
If tire pressure wrong. | |||
| |||
Correct tire pressure. | |||
| Install | ||
7 | Position wheel and tire assemblies (2) and screw in wheel bolts or screw on wheel nuts. | | |
Wheel hubs must be free of oil and grease. | |||
Use a wheel lift dolly (1). | |||
Commercially available devices/tools | |||
8 | Lower vehicle. | ||
9 | Tighten wheel bolts or wheel nuts. | | |
Wheel bolt | |||
Wheel nut | |||
10 | Install hub caps. | If removed. | |
11 | Reinitialize tire pressure sensors using vehicle diagnosis system. | If one or more tires were replaced or if a wheel and tire assembly rotation was carried out from front to back or from left to right, or if one or more tire pressure sensors were replaced. | |
| Connect/disconnect diagnostic unit |