Wheel bearing play
Excessive wheel bearing play can influence the measurement of the wheel speed sensors due to wobble.
Tire size
Malfunctions can occur due to fitting unequal size tires. Therefore always install tires of one size. Fitting summer and winter tires of the same size designation by axle is safe.
Sensor clearance
A distance between the wheel speed sensor and sensor rotor that is too large (Specified: 0.115 mm to 0.935 mm) at a speed > 5 km/h leads to a reduction in voltage. Specified value > 100 mV.
Due to this voltage reduction the anti-lock braking system (ABS) is not able to function, as planned, at speeds of > 3 km/h, and is instead active from > approx. 10 km/h upwards.
Hydraulic/electric connections
Incorrectly connected brake lines on the hydraulic unit or incorrectly connected electrical connections of the wheel speed sensors can lead to malfunctions in the brake system and thus to a safety impairment.
Corrosion on the electrical connector of the hydraulic unit can lead to ABS malfunctions.