AR35.31-P-0520-03P | Check rear axle differential oil level, correct if necessary | ||
| Oil filler/drain screw on rear axle differential modified | up to 18.1.04 |
Modification notes
21.6.11 | Value modified: Filling capacity | Model 203.040/042/043/046/052/081/084/087/092/240/242/243/246/252/281/284/287/292/707/730/731/740/742/743/746, Model 203.004/061/204/261, as of 09/2002, Model 203.007/207 without taxi version Model 209.341/342/343/361/441/442/461 |
Rear axle differential housing
Number | Designation | Model Model
| |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | ||
Rear axle differential housing
Number | Designation | Model | Model | |||
BA35.31-P-1001-02B | Oil filler screw, rear axle differential | Nm | 50 | 50 | ||
Rear axle differential
Number | Designation | Model Model Model | Model | ||
BF35.31-P-1001-01K | Filling capacity | Rear axle center assembly | Liters | 1.1 | 1.6 |
Specifications for Operating Fluids | Sheet | ||||
Rear axle differential
Number | Designation | Model | Model | ||
BF35.31-P-1001-01K | Filling capacity | Rear axle center assembly | Liters | 1.6 | 1.2 |
Specifications for Operating Fluids | Sheet | ||||
Rear axle differential
Number | Designation | Model Model Model | Model | ||
BF35.31-P-1001-01K | Filling capacity | Rear axle center assembly | Liters | 1.1 | 0.95 |
Specifications for Operating Fluids | Sheet | ||||
Rear axle differential
Number | Designation | Model | Model | Model Model | ||
BF35.31-P-1001-01K | Filling capacity | Rear axle center assembly | Liters | 0.95 | 1.1 | 1.6 |
Specifications for Operating Fluids | Sheet | |||||
Rear axle differential
Number | Designation | Model Model | Model | ||
BF35.31-P-1001-01K | Filling capacity | Rear axle center assembly | Liters | 1.2 | 1.2 |
Specifications for Operating Fluids | Sheet | ||||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1061-01A | Sealant, Omnifit 100H (50 g) | A 002 989 23 71 |
BR00.45-Z-1046-04A | Cleaning spray, Loctite 7063 (150ml) | A 001 986 71 71 10 |
P35.31-2007-02
1 Clean area around oil filler screw (50 g).
Only carry out the oil level check at interior temperature and not on a rear axle center assembly which is at operating temperature. Otherwise, when the rear axle differential is at operating temperature, required oil could escape.
2 Remove oil filler screw (50 g)
Replace oil filler screw (50g).
3 If necessary collect oil running out and allow to run out until oil only drips out of opening.
Shown on rear axle differential dia. 198 mm
50g Oil filler plug
50h Oil drain screw
4 Check oil level.
Correct oil level=underside of filler opening, refill if necessary.
The fully synthetic oil can also be used without reservations on rear axle center assemblies which have been produced before 4.11.2001. Mixing old universal hypoid gear oil and new FE hypoid gear oil does not impair the basic functions such as wear characteristics, leaktightness, etc. at the rear axle differential, but should, however, be avoided in the interest of better fuel economy.
P35.31-2158-01
5 Clean the new oil filler screw (50 g) and the threaded hole in the rear axle differential with Loctite 7063 cleaning spray and a suitable rag.
The oil filler screw (50g) and tapped hole must be free of oil and grease.
6 Apply about a drop of Omnifit sealing compound 100H on the second or third lower thread of the oil filler screw (50 g).
7 Screw oil filler screw (50g) into rear axle center assembly immediately and tighten to specified tightening torque.