Remove/install radial shaft sealing ring on output flange

AR27.40-D-0205WE

Remove/install radial shaft sealing ring on output flange

14.07.2019

Transmission

722.9 in model 906

2

Shaft seal

5

Flex disk

6

Propeller shaft

3

Output flange

 Warning

Risk of burns and scalding when handling hot fluids and components they come into contact with. Risk of injury to skin and eyes when handling hot fluids.

Wear protective gloves, protective clothing and safety glasses, if necessary. Pour hot fluids in suitable containers only.

AS00.00-Z-0033-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

 

Remove/install

1

Remove flexible coupling (5) of drive shaft (6)

AR41.10-D-0040WE

2

Remove output flange (3)

AR27.50-D-0620-02WE

 Collect escaping transmission oil.

 Collar nut, output flange to output shaft

*BA27.50-N-1001-01C

 Puller

*000589893300

 Socket wrench bit

*126589020900

 Drift

*716589011500

 Pin wrench

*901589000700

3

Pry shaft seal (2) out of automatic transmission using screwdriver

 Removal:
Place a lint-free rag underneath.
Otherwise the automatic transmission can be damaged.

 Installation: Install a new shaft seal (2) and press in using   drift.

 Drift

*140589121500

4

Install in the reverse order

5

Check fluid level in automatic transmission and adjust to correct level

Transmission 722.9 in model 906Transmission without guide tube for oil dipstick

AR27.00-D-0270WE

Transmission 722.9 in model 906Transmission with guide tube for oil dipstick

AR27.00-D-0101WE

6

Check automatic transmission for leak tightness with engine running

 Gear assembly

Number

Designation

Transmission 722.9

BA27.50-N-1001-01C

Collar nut, output flange to output shaft

Nm

200